
Nice automatic sliding door for Hale: Sumo motors explained
A Nice automatic sliding door saves time in large warehouses, workshops and garages, where heavy boxes open many times a day. The Sumo series engines work at 24 V, have magnetic encoder and cover sliding doors with two leaves, from 10 to 35 square meters.
In short: choose the Sumo engine after the surface of the door, check the chain and pinion, then add photocells, safety edges and a clear command.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A motorized industrial sliding door reduces the team's effort and helps keep the heat in the hall, because it stays open just as much as it needs. When choosing an automatic Nice sliding door after the surface and working frequency, the Sumo engine works without forces, and the CRA accessories complete the transmission. Do not forget the safety elements. Enter the category Sliding door automations and compare the models SU2000, SU2000V, SU2000VV and SU2010.
A Nice automatic sliding door changes the working rhythm in a hall or in a warehouse. The big boxes no longer require manual push, and access becomes predictable. In this article we talk about sliding industrial doors, not about glass doors for pedestrians. Models discussed find them in the category Sliding door automation.
What a Nice automatic sliding door means in industry
Industrial doors usually have one or two leaves suspended on a rail. The engine pulls the cans through a chain and pinion. Thus, the door opens sideways and does not occupy space in front of the void. This is especially important where stackers or trucks are circulating.
Therefore, an automatic Nice sliding door fits into large gaps, where a swing door would block the circulation. Also, the side opening leaves the ceiling open for rolling bridges or installations. On the other hand, the side opening requires free space next to the empty, at the length of the cane. Check the side wall before choosing this type of door.
Sumo family: sliding door motor on surface intervals
Nice proposes for these doors the Sumo series, 24 V, with magnetic encoder. The manufacturer shall specify that the engine does not require the adjustment of the race limiter. At an automatic Nice sliding door, the difference between models mainly holds the door surface.
- Nice SU2000: sectional doors or sliding with two leaves, between 15 and 35 m2.
- Nice SU2000V: doors with two leaves, between 10 and 25 m2.
- The US2000VV version covers doors with two leaves, between 10 and 15 m2.
- Nice SU2010: all 15–35 m2, with IP54 protection degree mentioned in the form.
So, for an automatic sliding door Nice of 20 m2, SU2000V or SU2000 comes into question. On the other hand, over 25 m2 remain in the EU2000 and the EU2010.
Transmission: chain, pinion and crown
The Sumo engine transmits movement through simple mechanical components. That's why CRA accessories matter as much as the engine. For example, crown Nice CRA7 has 18 teeth and addresses Sumo automations. At the same time, the 1/2 inch CRA3 chain comes to the meter, with the joining element.
- Chain Nice CRA4 comes in a 5 m package, for doors with one or two leaves.
- The CRA1 tree has a pinion with 18 teeth and a diameter of 25.4 mm.
- The CRA9 adapter covers 31.75, 35 or 40 mm shafts.
In other words, a Nice automatic sliding door works well only with a properly aligned transmission. A chain too stretched doors the pinion, and one too left salt on the teeth.
Safety at an automatic sliding door Nice
A heavy industrial door moves near people and machines. Therefore, safety is not optional. The installer shall establish the equipment after the site risk analysis. However, some elements appear in almost any project.
- Photocells on the path of the leaves, to stop at the obstacle.
- Safety edges on the edge of the cane that closes.
- Flashing light visible from both sides of the void.
- Easy stop button to find by staff.
It also checks internal labour security rules and authorities' requirements. General information about the employer's obligations can be found on the website Labour Inspectorate. Thus, an automatic sliding door Nice remains an aid, not a risk.
How to choose the engine for your back door
- Measure the width and height of the void, then calculate the surface.
- Check if the door has one or two leaves.
- You estimate the number of cycles a day.
- Choose the Sumo model according to the surface range.
- Complete the transmission with chain, crown and tree.
- Add the safety elements and order.
Finally, discuss configuration with a installer before ordering. Especially at the old doors, rail and carriages can ask for repairs before the engine. So, an automatic Nice sliding door starts from a healthy mechanical door.
Maintenance for automatic sliding door
A good motor doesn't make up for a dirty rail. Therefore, regularly clean the guides of dust, rumeguş or packaging waste. Then check the chain tension and wear of the teeth on the crown. In addition, test the sensitive photocells and edges monthly.
- Lubricate the chain as recommended by the manufacturer.
- Control the engine attachment to the console.
- Write down any new noise or squeezing on start.
Thus, an automatic sliding door Nice keeps the movement smooth for a long time. At the same time, small problems come to light before they stop the activity in the hall. For repairs, use a specialized service, not improvisations.
Daily door control
Staff need a simple and secure command. For example, the wall buttons work well when entering the hall. In addition, radio remotes help drivers entering with the stacker. A key selector, instead, limits access outside the program. For more complex installations, category industrial door fittings includes also control units such as D-PRO924. However, compatibility with the chosen engine is checked in the data sheet.
If the coat also has doors with opening in the sheets, see the category folding door automations, with HY7100 and HY7124 engines. Thus, choose an automatic Nice sliding door where the void allows and the folding variant where the side space is missing.
Frequently Asked Questions About Sliding Door Automation
Can I use Sumo and sectional doors?
Yeah. The US2000 records indicate the use of both sectional doors and backdoors.
What's the magnetic encoder doing?
The encoder reads the position of the door. Thus, the engine knows the race without the classic limiter adjustment.
Which motor do I choose for a 12 m2 Nice automatic sliding door?
The interval overlaps with the US2000V and the US2000VV. Therefore, the decision is based on the weight of the door and the working frequency.
Can I mount the engine on an existing door?
Many times, yes. However, the door must easily slide manually before motoring. First fix the worn-out carriages, then check the alignment of the rail.
For a smooth chosen Nice automatic sliding door, compare the Sumo models in category Sliding door automation. The Nice Store team helps you to choose from the motor to the chain and safety accessories.
















