
Nice programming accessories: cables, interfaces and mounting parts
Nice programming accessories are the small pieces that make the difference in installation and service: cables for the cloning of remote controls, connections to the computer, expansion plates and GSM modules. Alongside them, category includes columns and carcasses that keep the photocells and selectors in the right place.
In short: CABLA for cloning and programming, PIU for extra functions, OVBTGSM for GSM, PPH and PPK columns for clean mounting.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A well-equipped installer will quickly solve a programming, a remote control cloning or a central reconfiguration. Choose the cable after the series of transmitters or receivers, check the interface with which they work and add the appropriate columns for photocells and selectors. This remains clean and easy to maintain. Find all the pieces in the Various Nice Accessories category, and the Nice Store team helps you choose the compatible accessory.
Nice programming accessories help the installer to quickly configure remote controls, receivers and power plants. Without them, many operations require more time or even a repeated visit. In addition, category Other Nice accessories includes mounting parts such as columns and casings. In this article we group them after role, starting from the actual codes in the offer.
Why you need Nice programming accessories
A modern Nice system has many settings: radio codes, working times, special functions. You can set them from the central buttons, but some operations go faster with a dedicated cable. For example, cloning a series of remote controls takes less time on the computer. At the same time, an orderly service keeps the configuration and resets it to need. In addition, the appropriate cable reduces the risk of errors when manually entering codes. Thus, the customer receives a clean configured system.
Cables CABLA, the first programming accessories Nice
The CABLA series has different codes for different series. Therefore, choose the cable after the family of transmitters or receivers. Here are the models in the category:
- CABLA07 clone the issuers of the ERGO and PLANO series.
- Model Cabla03 works with the VERY series.
- For universal SMX and OX receivers you use CABLA06.
- The connection between O-BOX and the computer, via RS232 port, does so CABLA01.
So, the Nice programming accessories are not replaced between them. For example, a cable for VERY does not help a series ERGO.
O-BOX and configuration interfaces
Cable Cabla01 works with the O-BOX interface. Thus, this interface makes the connection between automation and the configuration program. Current versions, OBOX2 and OBOX2B with Bluetooth, appear in the category Other interfaces. At the same time, there is the PROVIEW interface and the IB interface for Bluebus photocells.
Nice programming accessories for new functions
Plate PIU extend the functions of the control unit. In other words, add options that the plant does not have from the factory. Then the module OVBTGSM Brings GSM communication for the O-View system. Through it, you use O-View Software Suite on your computer or smartphone. Thus, Nice programming accessories also allow remote interventions, if the facility accepts them.
Miscellaneous accessories Nice for mounting: columns and housings
Category does not only contain Nice programming accessories. Instead, it also includes parts that support the photocells and selectors. For example, the column PPH2 has 1000 mm and hosts two photocells. On the other hand, PPH3 has 500 mm and supports a single photocell. For a selector, the aluminium PPK column is 1100 mm. So, choose the column after the number of devices and after the desired height.
The EKA01 cover allows the fitting of compatible selectors such as EKS, EKSEU, EDS or EDSB to the PPH2 column. Also, the FA1 metal housing provides anti-efractory protection for FT210 photocells. In addition, the ELMM LED module complements the photocells with EPMOR reflection.
A well-chosen column correctly aligns the photocells and keeps the cables hidden. Compatible photocells choose them from the category Safety photocells, And the columns take them from here, along with the Nice programming accessories.
How to choose the right accessory
- First, note the exact series of the remote, receiver or power station.
- Then look for the cable or interface that mentions that series.
- Check if you already have the necessary configuration program.
- Finally, add the mounting parts you need on the field.
Thus, Nice programming accessories become a useful investment for each work. On the other hand, a single-kit client rarely needs cloning cables. For him, it matters more the columns and the casings. At the same time, they keep the cables in a separate kit with labels on the evenings.
Closure of remote controls: what you need to know
Cloning copies the data of one issuer to another in the same series. Thus, the customer quickly receives a new remote control, with the same functions. However, the procedure only makes sense for series compatible with the chosen cable. We also recommend the strict record of the delivered remote controls, especially to blocks and companies. If a remote control is lost, you delete it from the receiver's memory. For universal OX and SMX receivers, Nice programming accessories such as CABLA06 make this management easier.
An Example of Service Work
Let's take a regular case. A customer loses a remote ERGO control and asks for a new one. First, the installer deletes the lost transmitter from the receiver. Then, copy the data of an existing remote controls using cable CABLA07. Later, test the new transmitter at the gate. Thus, the intervention takes a short time and does not require the reprogramming of the entire system. Instead, at a power plant receiving new functions, the installer mounts the PIU board and checks the settings via O-BOX. It also notes the changes in the customer's file. Therefore, the appropriate Nice programming accessories shorten each visit.
Safe Work at Programming
The programming of a power plant requires access to components under tension. That's why you disconnect the power supply before you set up plates or switch connections. At the same time, you work with insulated tools and follow the manufacturer's instructions. Especially in commercial spaces, notify users before intervention. Then, after assembly, check the full operation of the gate. Thus, you confirm that the new settings do not affect safety. General recommendations about safe work find at European Agency for Safety and Health at Work. In this case, Nice programming accessories such as the PIU board are only mounted with the power plant shut down.
Frequently Asked Questions about Nice Programming Accessories
What cable do they use for ERGO remotes?
For the ERGO and PLANO series you use CABLA07. The VERY series needs Cabla03.
What is CABLA01 used for?
Connect the O-BOX interface to the computer, via RS232 port. Thus, you configure the automation of the program.
PPH2 column holds two photocells?
Yes, PPH2 has 1000 mm and houses two photocells. For a single photocell there is PPH3, 500 mm.
Find all pieces in category Other Nice accessories. The Nice Store team helps you choose Nice programming accessories compatible with your equipment.















