
Safety accessories for automatic doors: photocells, edges, lamps
Automatic gate safety accessories are components that stop or reverse the movement when an obstacle occurs and that announce from time to time the start of the gate. The photocells, the sensitive edges, the lamps and the Nice detectors work together with the plant and reduce the risk of hit.
In short: passing photocells, edges on the muchia, warning lamp, vehicle detector and battery for current penile.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A safe automatic gate depends not on a single sensor, but on several layers of protection being completed. The photocells monitor the passage, the edges protect the muchials, and the lamp warns the pedestrians. The final configuration shall be set by the installer after the risk analysis and the applicable standards of your portion. Choose components from the Automation Accessories category, and the Nice Store team helps you build a complete safety system.
Automatic gate safety accessories protect people, animals and machines in the moving area. A heavy gate does not stop alone at contact with an obstacle. Therefore, it needs sensors to control stopping or reversing. In this guide we present Nice accessories in the category Automation accessories, grouped after role. At the same time, we include mounting parts, which in turn influence safety.
Why you need safety accessories for automatic gates
The engine doesn't see what's in the way of the gate. Thus, the task of detecting obstacles comes back to the accessories. First, the photocells observe the passage between the pillars. Then the sensitive edges react to contact. Finally, flashing light warns that the gates are to move. On the other hand, no component covers all risks on its own.
However, the exact configuration depends on the type of the gate and the place of assembly. Therefore, we recommend a risk analysis by the installer. The standards for motorized doors and doors are found through ASRO.
Photocells, first safety accessories for automatic gates
Category Safety photocells includes models for almost any mounting. As safety accessories for automatic doors, the photocells work in pairs: a transmitter and a receiver. For example, the set EPL It has large dimensions and is mounted on the outside. In addition, EPLB communicates using Bluebus technology, with simpler wiring.
For narrow pillars, EPSA and EPSAB slim photocells have anti-efractory metal housing. In contrast, the EPLIO and EPLIOB shall be mounted in a frame and oriented at 30 degrees. At the same time, F210 and F210B rotate up to 210 degrees, useful when poles are not aligned.
Then the EPMOR photocells work through reflection. On the other hand, the set FT210B has its own battery and is used for the edges of the mobile phone.
Safety devices for gates: sensitive edges
Sensitive edges are safety accessories for automatic gates that stop the movement in contact. They complete the photocells, which do not cover all areas. For example, in the category Safety edges Find mechanical edge CMA 2MT, 2 meters, with aluminium profiles. At the same time, the range also includes the lengths of 1.5, 1.7 and 2.5 meters.
For mobile phones, wireless transmitters avoid wiring on the moving side. Thus, TCW1 works with batteries, inside or in shaded areas. Instead, TCW2 has photovoltaic panel and rechargeable batteries, for sunny areas. At the same time, the TCB65 and TCBS60 edges come in 10 meter rollers, and the CMBK4 and CMBK6 kits help build the mechanical wing.
Flashing lights and detectors
Among the safety accessories for automatic doors, the lamp has a warning role. She announces the move of the gate before it starts. Thus, pedestrians and drivers have time to stay away. Category Flashing lights You find ELDC at 12–36 Vcc, and ELAC at 90–240 Vca. On the other hand, the LLW wireless lamp has integrated photovoltaic panel.
Instead, mass metal detectors work with loops buried on the roadway. Thus, detectors also enter the safety accessories for automatic gates, because they seise the vehicle. For example, the LP21 model has a channel, and LP22 has two channels, both at 24 V. You find them in the category Metal mass detectors, useful especially at large gates and barriers.
Batteries, gear racks and foundation boxes
Safety also means power failure. This is why safety accessories for automatic gates also include buffer batteries in the category Batteries, such as PS124 or PS324. Then the correct mechanical assembly prevents the locks and wear. Category Gear racks offer ROA6 of nylon with metal insert, ROA7, ROA8 and ROA81 of metal.
For buried engines, Foundation tapes I support the ground mechanism. For example, MFABBOX and MFABBOXI serve M-FAB engines, and LFABBOX4 serve L-FAB engines. In addition, the MECX version, made of stainless steel, has holes for drainage pipes.
Universal and mounting accessories
Category Other accessories includes GSM RTU5025 and Wi-Fi WF01. At the same time, you find there the Clodup CD02 cloning remote. Columns PPH2 and PPH3 for photocells appear in Other Nice accessories.
How to choose safety accessories for automatic gates
- Identify the risk zones: crossing, closing hole, crushing zone.
- Mount photocells on the pass at the height recommended by the manufacturer.
- Add safety edges to the bumpers that can hit.
- Install a visible lamp of both senses.
- Provides a buffer battery if the claws serves an important output.
Therefore, safety accessories for correctly chosen automatic gates cover each risk area. Besides, a monthly photocell test only takes a few minutes.
Periodic verification of safety
Automatic gate safety accessories lose their efficiency if no one checks them. For example, a dirty or disenfranchised photocell can make mistakes. We therefore recommend a few simple checks:
- Discontinue the beam with an object while the gates close and watch the stop.
- Lightly press the sensitive edge and see if the movement reverses.
- Follow if the lamp blinks before starting.
- Test operation on the battery, with general safety off.
At the same time, clean the lenses of the photocells after storms or after dust works. If a test fails, stop automatic use and call the installer. Thus, protection remains active over time.
Frequently Asked Questions about Safety Accessories for Automatic Gates
Can I just get the photocells?
Not usually, because the photocells don't see direct contact. Therefore, the sensitive edges complement the protection.
Which photocells do I choose for narrow poles?
The EPSA and EPSA slim models have thin body and non-efractory metal casing. For Bluebus choose EPSAB.
Does the LLW lamp need cable?
No, the LLW lamp communicates wirelessly and has integrated photovoltaic panel. However, check if the place receives enough light.
Find all components in the category Automation accessories. The Nice Store team helps you choose safety accessories for your proper automatic gates.















