Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Nice accessories for swing gates: supports, stops and unlocks

Swing gate automation

Nice accessories for swing gates: supports, stops and unlocks

Nice accessories for swing gates connect the pillar and leaf motor, stop the gates exactly where it should be and allow manual unlocking. Without the right supports and stops, even a good motor works wrong. Here are the pieces that exist and how you choose Nice accessories for matching swing gates.

In short: PLA grips, PLA13 stop limiters, BMA and MEA for buried motors, plus spare units for service.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

Nice accessories for the right swing gates make the difference to any gate with leaves. The correct supports keep geometry, the limiters stop the cane without shocks, and the unlocking keys allow you to manually open to a power outage. For service, spare units return automation to operation. Note engine code and choose the right parts in the category Swing automation accessories.

Nice accessories for swing gates means more than spare parts. They decide how to catch the engine, where to stop the cane and how to open the gates manually. A wrong mounted support changes the working angle and forces the engine. Category Swing automation accessories Find parts for new assembly and service.

Role of the pieces: Nice accessories for swing gates

The swing engine works on a bow. Therefore, the exact position of the catch points influences the force and the opening angle. At the same time, the stoppers protect the swings from hitting at the end of the race.

The original parts also retain the geometry indicated by the manufacturer. An improvised grip can change the angle and force the swings.

  • Supports attach the engine to the pole and the lever.
  • Limiters stop opening or closing doors.
  • Adaptors and keys help buried engines.
  • The exchange units shall re-act as a faulty automation.

Nice accessories for batting gates: PLA supports

The PLA series covers the catch for the linear engines. PLA6 back support has 250 mm and is attached to the pole. In addition, previous support PLA8 It gets caught by screwing on the leaf. Then, PLA14 and PLA15 offer adjustable versions, later and earlier.

Thus, choose Nice accessories for swing gates after the pole. A side pole often requires a longer back support. Instead, adjustable support helps you correct the angle without new weld.

At the new gates, the sweat usually prepares the catch plates before the engine assembly. Then the installer fixes the supports to the quotas in the engine manual. In this way, the engine stroke remains within the limits indicated by the manufacturer.

When choosing an adjustable support

Adjustable support goes well at the old gates, where the pillars have no standard odds. It also helps when you want a different opening angle. However, always check whether these Nice swing gate accessories match the motor model.

Race mechanical limiters

PLA13 Limiters Set the stop points at opening or closing. In other words, the cane stops in the same place at each cycle. Therefore, the engine does not force the swings or the pole. These Nice swing gates accessories are especially important for heavy doors, which have a high inertia.

Nice accessories for swing gates with buried motor

The buried engines require special parts because they are below ground level.

  • BMA2: adaptors for two buried motors, compatible with many commercial foundation boxes.
  • The BMA1 accessory allows openings up to 360 degrees, for leaf up to 3.5 m.
  • The MEA5 lever key unlocks the MEA3 system.
  • The MEA6 fastening plate, with limiter, for places where the tape cannot be buried in cement.

For example, BMA1 accessory solve the doors that need to open very wide. So, Nice accessories for well-chosen swing gates extend the possibilities of a buried motor. For the tape itself, see category Founding boxes.

Exchange units and service parts

Sometimes the engine doesn't break down, it's electronics. Command unit HKA2 serves to replace the control plate. The WLA1 unit then replaces the electronic WL1024C engine. On the other hand, the 6-metre KA1-wrapped metal cable kit is used on the KIO system.

In this case, Nice accessories for swing gates type spare part saves your automation without new motor. Before ordering the electronic, check the safety and the food. Sometimes a weak connection mimics a flawed plate. Therefore, an electrician can confirm the diagnosis before purchase.

Nice accessories for swing gates for new mounting or repair

Nice accessories list for swing gates differs from situation. At a new installation, you especially need supports and stoppers. Instead, at a repair, you look for the piece that gave way.

Nice parts for swing gates at a new installation

  • Back support on the pole, PLA6 or PLA14 type.
  • A previous support on the leaf, such as PLA8 or PLA15.
  • PLA13 limiters, if you have no stops of your own.
  • For buried engines: BMA2 adapters and foundation box.

To a repair

First, identify the symptom. If the engine no longer responds at all, check the electronics and power supply. When kitchens stop in different places, the problem often holds down stoppers or adjusters. Therefore, Nice accessories for different swing gates solve different problems.

How to identify Nice pieces for swing gates

First, read the code on the engine label. Then look for the accessory that mentions that code or that series. If you don't find the label, photograph the engine and the catch. The store team can then identify the piece.

  • Engine code: e.g. WL1024C, HK or MFAB.
  • Type of assembly: linear, buried or with arm.
  • The dimensions of the pillar and the cane.

In conclusion, Nice accessories for correct swing gates start from the exact engine code. For new motors, see category swing gates motors. If you are interested in the technical rules for automatic gates, the applicable standards can be found at ASRO.

Frequently Asked Questions about Nice accessories for swing gates

Can I use PLA supports on any Nice motor?

Not to anyone. Check the engine series in the description of the accessory before ordering. Sometimes the compatible model appears even in the name, such as WL1024C at WLA1.

What do they do if the claws hit the pole at the opening?

A mechanical limiter, such as PLA13, sets the stop point. Also check the adjustment of the races in the plant.

How do I manually open a buried motor?

You use the engine unlocking system, e.g. the MEA5 key for MEA3.

Is it just worth changing the command unit?

Yeah, if the engine works mechanically. Among the Nice accessories for swing gates you find exchange units, such as HKA2.

Find all Nice accessories for swing gates in category Swing automation accessories. The Nice Store team helps you identify the piece compatible with your engine.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).