Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Automation for shadow systems: Patio pergola and NiceWay commands

Solutions for shade

Automation for shadow systems: Patio pergola and NiceWay commands

An automation for shadow systems allows you to adjust the pergola or oblonium in one gesture, without the handles and effortlessly. In Nice, the range starts from the Patio linear actuator for pergolas and continues with control units, sensors and NiceWay transmitters mounted on the wall or on the table.

In short: Patio moves the pergola blades, PATIOCONTROL coordinates them, the sensor brings temperature data, and NiceWay gives you command.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A motorized shadow system brings comfort only if all the pieces speak the same language. Choose the actuator after the required force, add the control unit and sensor, then decide where you want the buttons: on the wall, on the table or in the pocket. Ask for the wiring plan before mounting and keep the documentation for the service. See products grouped in the Shadow Solutions category, and the Nice Store team helps you make up the right configuration.

An automation for shadow systems converts the pergola, shutter or cover into remote controlled equipment. So instead of crank, you press a button. However, the good result depends on the correct choice of each component. In this article we start from the real Nice products in the category and explain how they relate to each other.

What automation means for shadow systems

Any motorised system shall have three parts: the moving element, the deciding element and the controlling element. First, the engine or actuator makes the mechanical effort. Then the control unit receives the commands and stops the movement at the end. Finally, the transmitter or sensor transmits the order. If one of the pieces is missing, the system does not work completely.

Therefore, an automation for shadow systems is planned from the beginning as a set, not as parts purchased separately.

Pergola engine: Patio actuator

For parrots with adjustable blades, Nice proposes the Patio family. Linear actuator PATIO1515 develops 1500 N and works at 24 V. In other words, it uses a low voltage, easier to manage outside. The 1500 N force describes the push or pull that the rod can make. Therefore, you compare this value with the requirements of the pergola manufacturer.

If you start from scratch, Kit PATIOKIT1515 Simplifies the choice. It includes the actuator, control unit and temperature sensor. Thus, you have an automation for complete shadowing systems in one code.

PATIOCONTROL Control Unit

If you already have the actuator, you can command separately Unit PATIOCONTROL. She works all at 24 V and addresses, in particular, the Patio game. In addition, the plant manages the start, stop and end positions of the blades. That's why you don't use a generic central gate in a shadow system automation.

Temperature sensor

Sensor PATIOSENSORT appears in the category Common accessories. Then he transmits information about the outside temperature to the unit. The mode in which the central office uses this data shall set the programming according to the manual. For example, the installer can set up a cold reaction, if the power plant allows.

NiceWay orders for pergolas and oblonas

In an automation for shadow systems, the control matters as much as the engine. Category Control and programming gathers support for NiceWay transmitters. They don't move anything, but they decide where the command is in the house. Here are the useful options in an automation for shadow systems:

  • Opla wall plates, square or rectangular, such as WSB, WSA or WRW.
  • Ondo WAX table holder, white plastic and blue ice rubber.
  • The WEO anti-shock version, orange, for meals or offices.
  • Mini Go heels, e.g. WCO or WCI, for wearing in your pocket.

The Opla plates have the thickness of the plate itself, so the transmitter inserted into them seems to be embedded in the wall. On the other hand, the Go Heel makes the NiceWay emitter portable. The manufacturer describes it for the management of up to 240 channels. Therefore, from the same place pergola, oblonium and gate controls, if the receivers accept the protocol.

Module WM001G in an automation for shadow systems

First, the transmitter itself enters these supports. For example, WM001G module Commands an automatism in the open-stop-close mode. For more areas, you can find options with more channels in the category Transmitter modules. At the same time, there are also models like WM004G, with the control for the activation of the sun sensor.

Equilibrated shutters: Rondo and Giro engines

Category Solutions for shade includes and automations for shutters. Here, an automation for shadow systems works with much larger weights. In particular, we talk about balanced shutters, often encountered at windows and commercial spaces. The Rondo range covers lifting forces of 130 kg and 180 kg, in variants with or without brake. For example, Rondo RN2040 lifts up to 180 kg and has brake and release device. In contrast, the Giro family starts from 170 kg, and the GR340E01 version, with a double motor, reaches 340 kg.

Instead, all these motors work at 230 V. So their wiring differs from that of the 24 V Patio actuator. The choice between Rondo and Giro keeps the weight of the shutter and the need for brake.

Periodic assembly and verifications

First, in an automation for shadow systems, the electrician brings the power to the control unit. The installer then fixes the actuator to the structure, according to the pergoola manufacturer's scheme. Subsequently, the race heads are scheduled and the issuers are associated. In addition, it is worth checking the catch after the first weeks of use. At the same time, regularly clean the actuator's rod of dust and leaves. It shall also record in the documentation the codes of the associated issuers.

Steps for successful automation for shadow systems

  • First, find out what kind of shade you have: pergola with blades, shutter, or a cover.
  • Then, ask the manufacturer of the structure for the force or weight that the engine must cover.
  • Set working voltage: 24 V for Patio, 230 V for Rondo and Giro.
  • Choose the compatible control unit and any sensors.
  • Finally, decide where you set up the controls and how many areas you want to control.

At the same time, it retains free access to the actuator for verifications. Especially a wind and rain pergola needs regular catch control. For standards applicable to external structures, you can consult ASRO.

Frequent questions about automation for shadow systems

Can I motorize an existing pergola?

Sometimes yes, if the structure allows the installation of a linear actuator. In this case, the pergola manufacturer shall confirm your catch points and the force required.

What does the PATIOSENSORT sensor bring?

Provides temperature information to the control unit. However, the system reaction is determined by the schedule made by the installer.

Can I order the pergola and the gates with the same emitter?

Yes, if the receivers accept the same Nice radio protocol. That's why you check the models before you buy them.

All described components are in the category Solutions for shade, including in Pergola automation. The Nice Store team helps you to make an automation for shadow systems suitable for your space.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).