Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Industrial rapid door automation: HDFN or HDFNI for your coat

Industrial solutions

Industrial rapid door automation: HDFN or HDFNI for your coat

In heavy-traffic halls, each slow opening costs time and energy. A fast industrial door automation from Nice, from the HDFN (3x400 V) or HDFNI (230 V) series, shortens the cycle and helps to maintain temperature. See how you choose the right family for your network.

In short: HDFN goes on 3x400 V, HDFNI on 230 V; choose after feeding in the hall, daily traffic and size of the access gap.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

Fast doors bring real benefits where traffic does not stop: ramps, cold areas, access between production and storage. The choice begins with the power supply, continues with the size of the void and ends with the safety system established with the specialists. A well-sized industrial fast door automation reduces energy losses and dead times. Compare HDFN and HDFNI variants in category High-speed door automations.

Quick doors solve a simple problem: in crowded halls, a slow door loses heat and stops traffic. A fast industrial door automation shortens the opening time and reduces the waiting time for the motorcycles. On the Nice Store, the range covers the Nice HDFN and HDFNI engines.

Category High-speed door automations You find two families, first of all by feeding. The first question, therefore, is not about speed, but about the electricity grid in the hall.

HDFN or HDFNI: triphasic or monophasic

The HDFN series works at 3x400 V, i.e. on three-phase power supply. Instead, the HDFNI series doors 230 V, i.e. monophase power. So, check first what tension you have next door. A 230 V industrial fast door automation simplifies the assembly where you do not have a three-phase line.

On the other hand, triphasic feeding often occurs in production halls. Instead, commercial spaces or small warehouses often have only monophasic. Thus, the dual range offers you options for both situations.

At the same time, the code of each model contains two numerical values. They differentiate the variants in the range, so you compare them with the door data before ordering. In other words, do not choose after the first code in the list. In addition, ask the installer to confirm the appropriate option for the size of the void.

When it deserves an industrial fast door automation

The quick door justifies your investment where you often go. For example:

  • Load ramps with continuous traffic of pallets.
  • Separations between hot and cold areas.
  • Access between production and storage.
  • Spaces where dust or air current disturbs the process.

In these cases, an industrial fast door automation only keeps the door open as the vehicle passes. Thus, you lose less energy and keep better temperature. On the other hand, at a used access twice a day, a classic sectional door can reach.

Concrete benefits in the hall

  • Less hot air lost in winter at every pass.
  • Shorter waiting times for motorcycles.
  • Better separation between dust and clean areas.
  • Predictable flow to ramps in peak hours.

However, the benefits only arise if the door matches traffic. For example, a quick door to a used access rarely shows its advantages. Therefore, it first analyzes the actual flow of vehicles and people. In other words, a fast industrial door automation responds to a clear need, not a fashion.

Automatic control: radar, loop or button

The quick door works best with automatic opening. For example, a radar detects the approaching motorist. Instead, the inductive loop in the floor only reacts to vehicles. The buttons remain useful for pedestrians or manual control. At the same time, remote controls help to access rarely used. Therefore, the right combination reduces unnecessary stops and wear. Moreover, a well thought out configuration shortens the time when the door is open.

Checklist: Quick door automation

First, note the size of the void and the type of door. Then estimate the number of cycles per hour at the top of the schedule. In addition, check the space above and from the side of the void, for motor and axle. Finally, set the control mode: button, radar, loop inductive or remote control. With these data, an industrial fast door automation is correctly sized.

Also think about the command unit. Category control stations Find Nice units, like Nice NDCC2200. However, first check compatibility with the chosen engine. Therefore, a fast industrial door automation is planned together with the plant, not separately.

Safety of people around the door

A quick door moves fast, so her area requires clear rules. First, mark the passageway on the floor. Then, separate the pedestrians from the machine's, where space allows. At the same time, check the obstacle stop devices periodically. For general recommendations on health and safety at work, consult European Agency for Safety and Health at Work.

However, the final solution for a fast industrial door automation is established after site, traffic and risk analysis. So, it involves the job security officer from the start.

Maintenance: fast door automation without stops

A quick door makes many cycles, so wear appears faster than at a regular door. They therefore schedule regular checks. For example, it controls the fixing of the engine, the condition of the cables and the reaction of the sensors. Plus, write down any new noise. Thus, a fast industrial door automation remains reliable over time and avoid unplanned shutdowns.

On the other hand, choose from the beginning the spare model. An motor requested at the limit is heated more often. In other words, don't save on sizing. It also keeps a simple log of interventions, to see the trends from time to time.

Frequently Asked Questions about Industrial Fast Door Automation

What is the difference between HDFN and HDFNI?

HDFN works at 3x400 V. HDFNI uses 230 V instead. The rest of the election depends on the door data.

Can I mount an industrial fast door automation without a three-phase line?

Yeah, with the HDFNI series on 230 V. For example, HDFNI-45-90 or HDFNI-60-140 enter this family.

The quick door replaces the sectional door?

Not always. Many use both: the sectional door closes at night, and the fast door works daytime.

Who sets the safety system?

The installer, along with the job security officer. At the same time, the decision takes into account the site risk analysis. Therefore, involve both of them in the bidding phase.

In conclusion, a fast industrial door automation is chosen after feeding, traffic and void dimensions. Compare HDFN and HDFNI models in category High-speed automation doors Nice, And the Nice Store team helps you choose for your coat.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).