Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Nice automations for industry: high-speed doors, sectionals and rollers

Industrial solutions

Nice automations for industry: high-speed doors, sectionals and rollers

Nice automations for industry means motors and power plants for large gates, waste cycles and three-phased power supply. In halls, warehouses and workshops, the right choice between fast, sectional doors or industrial rolls directly influences the flow of goods and the safety of people.

In short: HDFN and HDFNI for high-speed doors, SD and SDN for sectionals, RDF for rollers, and NDCC power stations for their command.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A properly automated industrial door reduces waiting times at the ramp, keeps the temperature in the hall and limits manual intervention. Start from the door type, check the available power supply and choose the engine-compatible power plant. For the safety of personnel, complete the system with photocells and safety edges, according to the risk analysis. See the range in the Industrial Solutions category, and the Nice Store team helps you choose the right combination.

Nice automations for industry cover three large types of doors: fast, sectional and rollers. At the same time, each type has dedicated motors, with 230 V variations or three-phase voltage. In addition, NDCC series power stations complete the system. We will continue to explain how you read the range and what you check before ordering.

Nice automation range for industry

Category Industrial solutions group four families of products. First, engines for high-speed doors. Then the engines for the industrial door sectional. Follow the roller engines and, finally, the control units. Thus, you find in the same place all the main pieces of a hall door.

Nice motors for fast industrial doors: HDFN and HDFNI

Fast doors open and close many times during a tour. Therefore, Nice automations for industry include dedicated motors in the subcategory High-speed automation doors. Thus, Nice Store offers two power options. The HDFN series works at 3x400 V, for example HDFN-60-140. Instead, the HDFNI series works at 230 V, like HDFNI-80-90.

The numbers in the code distinguish the variants between them, usually after couple and speed. However, the exact values confirm them in the manufacturer's technical file. Range 230 V climbs to HDFNI-220-70, and range triphased to HDFN-160-95. Therefore, you compare the code with the size and weight of the door.

Nice automations for industry at 230 V or 3x400 V

The choice primarily holds the network in the hall. So if you're just monophasic, stay at HDFNI. Instead, if the coat has three-phase power supply, you have access to all HDFN variants. However, the final decision is taken by the electrician, after checking the painting.

Sectional Industrial Doors: SD, SDN, SDNI and SWN

Sectional doors close loading ramps and large entrances into warehouses. For them, the range of Nice automations for industry brings motors into the subcategory Sectional door automation. For example, SD-100-24, SD-120-20 and SD-140-20 models work at 3x230 or 3x400 V. So, too SDN-70-24 accept both three-phased voltages.

On the other hand, SDNI-120-20 and SWN-70-20 works at 230 V. Thus, you can automate a sectional door and in a workshop without triphasic. At the same time, you require checking the balance of the arcs before mounting.

Industrial solutions Nice for rollers: RDF series

For hall rollers, Nice automation for industry means RDF series, with 3x230 or 3x400 V power supply. Range starts from RDF-140-20 and reach RDF-1400-24. At the same time, there are intermediate steps, such as RDF-290-15, RDF-500-24 or RDF-1100-10. In other words, choose after the size and weight of the roll. All models appear in the subcategory Roller automations.

Quick door, sectional door or roll?

Every guy responds to another need. The quick door fits in with traffic often, where it matters to keep the temperature. Instead, the sectional door isolates the ramps and the fronts well. On the other hand, the roller occupies a little space above the void and matches the spaces with the agglomerated ceiling. So, in Nice automations for industry, the choice of the type of door comes before the engine.

Examples of Hale Configurations

So, here are three typical situations. We present them with guidance, and the final dimension remains in the hands of the installer.

  • A zone-to-zone pass-by warehouse doors a fast door, with compatible HDFN and NDCC central motor.
  • A loading ramp usually has a sectional door, e.g. with the SD-120-20 motor.
  • A workshop without triphasics can choose SDNI-120-20 or SWN-70-20, both at 230 V.

In all cases, Nice automations for the industry work properly only together with the right safety. It is also worth a maintenance plan, with periodic door and engine checks. Thus, you reduce unplanned stops during the program.

NDCC power stations: door brain

The engine doesn't work without a proper control unit. In subcategory Control units Find models NDCC1000, NDCC1003, NDCC1100 and NDCC1200. Next follows the series NDCC2000, with NDCC2000, NDCC2100 and NDCC2200. The exact differences are found in the technical file and usually keep the engines accepted and the functions. Therefore, in any Nice automation project for the industry check the compatibility of the power plant with the engine.

Safety in warehouses and warehouses

An industrial door moves next to people, stackers and merchandise. That's why safety matters as much as engine power. Therefore, we recommend photocells throughout the width of the void and safety edges on the closing hole. At the same time, you instruct staff not to pass through the door during movement. In addition, the signalling lamps announce the door movement in the noisy areas.

Find these components in the category Automation accessories. At the same time, the final configuration is stable after the job risk analysis. Employers' obligations regarding work equipment Labour Inspectorate.

How to choose Nice automations for industry

  • Identify the type of door: fast, sectional or roll.
  • Check the feed in the hall: 230 V or triphasic.
  • Note the dimensions and approximate weight of the door.
  • Choose the engine from the right series and the compatible power station.
  • Add the required safety for the risk analysis.

Thus, avoid the wrong commands and time-losses at the assembly. In addition, a installer with experience in industrial doors easily checks the final list.

Frequently asked questions about Nice automations for industry

Can I use an HDFNI motor in a three-phase-free robe?

Yeah, the HDFNI series works at 230 V. However, check the size of the door in the technical file.

What do the SD-120-20 numbers mean?

In other words, the code separates the motor variants between them. The exact significance of the figures confirms it in the manufacturer's documentation.

Do I need a separate plant?

As a rule, yes, because industrial engines work together with a compatible control unit, such as the NDCC series.

View all models in category Industrial solutions. The Nice Store team helps you choose Nice automations for the right industry for your coat.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).