
Storage door automation: Nice SD, SDN and SWN engines
The door of a warehouse opens dozens of times a day, and every manual maneuver costs time. A storage door automation with Nice SD, SDN, SDNI or SWN motors provides you with constant openings, on three-phase power supply or at 230 V. See how you choose the right model.
In short: choose after the network; SD-100-24, SD-120-20, SD-140-20 and SDN-70-24 go on 3x230/3x400 V, and SDNI-120-20 and SWN-70-20 go on 230 V.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A motorised storage door saves time at each reception and dispatch. Start from the available power supply, then estimate traffic and check the door balance. Add a compatible power station, signalling and safety devices selected after risk analysis. Thus, a warehouse door automation works predictable and protects the team. Compare engines in category Industrial door sectional automations.
In a warehouse, the access door works almost non-stop: reception, expedition, team entrances. A storage door automation reduces lost time and protects indoor temperature. Category Sectional door automations from the industrial solutions Nice find six dedicated motors.
Nice models for storage door automation
The range clearly divides after feeding. Four models work on 3x230/3x400 V, and two on 230 V. Therefore, the first check concerns the electrical table of the warehouse.
- Three-phase, 3x230/3x400 V: Nice SD-100-24, Nice SD-120-20, SD-140-20 and Nice SDN-70-24.
- Single-phase, 230 V: Nice SDNI-120-20 and Nice SWN-70-20.
Therefore, a 230 V storage door automation matches spaces without a three-phase line. On the other hand, the three-phase models match the available industrial food warehouses. At the same time, the code of each motor contains two numerical values, which differentiate the variants. Therefore, compare them with the door data and the installer recommendation.
Why it deserves a storage door automation
A warehouse loses time at every manual opening. For example, the operator comes down from the lift, lifts the door and then returns. In addition, the door left open lets the cold winter and the heat summer. In other words, the hidden cost appears daily. Especially at the cold ramps, every minute with the door open matters.
- Constant opening, no physical effort for the staff.
- Predictable closing, with fewer forgotten doors open.
- Access control by buttons, remote controls or readers.
- Integration with signalling and safety systems.
Thus, a storage door automation recovers its cost over time, not just through comfort.
How to size a storage door automation
First, note the area and weight of the sectional door. Then estimate the number of cycles per day and hour. In addition, check whether the door arches hold the weight well. At the same time, measure the side space, where the engine is mounted on the axle.
On the other hand, think about the future. A warehouse is growing, and traffic is growing with it. Therefore, choose a storage door automation with backup, not a model used at the limit. Also note whether the door works in cold, dust or wet.
Examples of automation of the storage door
Each warehouse has another rhythm, so the examples below remain indicative.
- Small, triphasic-free warehouse: SDNI-120-20 or SWN-70-20, at 230 V.
- Multiple ramp logistics center: SD models on 3x230/3x400 V, one on each door.
- Hale with one large door and medium traffic: SD-120-20 or SD-140-20, after the door data.
- Workshop with attached warehouse: SDN-70-24, if there's a three-phase feed.
However, the final choice comes after measurements on the spot. Therefore, a storage door automation starts from the installer's visit, not from the catalog.
Command, Signalling and Central
The engine alone doesn't make the system complete. First of all, you need a proper engine control unit. Find Nice variants in control stations; verify compatibility with the chosen model, however. Then add the buttons to the comfortable height and a warning lamp. Also, at a high-traffic storage door automation, the remote controls help motorists. At the same time, you can connect the door to an access control system, such as card readers. Thus, only the right-of-access team opens the storage area.
Sectional door or fast door?
Some warehouses combine two types of doors. The sectional door isolates well and closes at night. Instead, the fast door serves intense daytime traffic. If you're interested in the second option, see High-speed door automations. So the choice depends on flow, not a single rule. For example, at a ramp with dozens of passes per hour, the quick door shortens the wait. Instead, at night, the sectional door ensures solid closure.
However, for most ramps, a storage door automation on the sectional door remains the basis. Later, you can add a quick door to the most crowded access.
Safety of warehouse staff
The big doors move next to people and machines. Therefore, mark the door area and keep the hallway under it. Then periodically check the stop at the obstacle and the photocells. At the same time, instruct the team on manual release in case of power outage. For the general framework on labour security in warehouses, consult Labour Inspectorate.
In this case, the final solution for a storage door automation shall be established after the risk analysis and the site requirements. In other words, do not copy the configuration of another repository without a proper evaluation.
Maintenance in crowded warehouses
A storage door makes many cycles, and wear gathers. First, periodically check the arches and cables of the door. Then control the fixing of the engine to the axle and the reaction of the photocells. It also cleans the run-off area of the dust door and packaging waste. Thus, avoid stopping in full expedition program. In other words, maintenance costs less than a blocked ramp.
Frequently Asked Questions about Storage Door Automation
Can I install a storage door automation without triphasic current?
Yeah. SDN-120-20 and SWN-70-20 work at 230 V.
What does 3x230/3x400 V mean in SD models?
The name shows that the engine accepts three-phase power at 3x230 or 3x400 V. The installer confirms the correct connection. However, it does not connect the engine without an electric painting check.
Is it worth combining the sectional door with a quick door?
Yes, especially at the warehouse doors with large daily traffic. So the sectional closes the night, and the fast door works the day.
Who chooses the safety devices?
The installer, together with the job security officer, after risk analysis.
In conclusion, a well-chosen warehouse door automation starts from power supply, traffic and door dimensions. See all engines in category Sectional door automations for storage, And the Nice Store team helps you choose for your space.















