
Nice accessories for sliding gates: gear racks and spare parts
Nice accessories for sliding gates keep the automation running: gear rack transmits the movement, and spare units put a failed electronic motor back into operation. The correct choice starts from the motor code and the weight of the gate. Here's how you choose Nice accessories for seamless sliding gates.
In short: rack gear is chosen after the weight of the gate and motor, and the exchange unit after the exact code: RBA3, NKA3, ROA38, RUA1, RUA2 or RUA6.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A healthy motor-powered sliding gate can be blocked by a small piece. That's why Nice accessories for quality sliding gates matter as much as the motor. An appropriate rack gear weights and a correct code exchange unit return automation to operation without a new kit. Write down the motor model, measure the throats and check the type of existing cremation. Then choose the song from the category Sliding automation accessories.
Nice accessories for sliding gates cover two different needs. On the one hand, you have the mechanical parts, especially the rack. On the other hand, you have the switch electronics for ROBUS, NKSL, ROX and RUN engines. Category Sliding automation accessories You find both types. Below you see how you choose each piece.
Gear rack, the first of Nice accessories for sliding gates
The rack window is mounted on the gate, the length of the race. The pinion of the engine engages in it and pushes the gates. That's why the tooth module must match the pinion. At the same time, the chosen material must bear the weight of the portion.
Nylon with metal insert or metal galvanized?
Gear rack ROA6 uses metal insert nylon at 25x20x1000 mm. Description of a gate indication of not more than 500 kg. Instead, ROA7 has 22x22x1000 mm and comes galvanized, with screws and spacing. Then, ROA8 has 30x8x1000 mm, module 4, including screws and spacing.
In short, among Nice parts for sliding gates, the nylon with metal insert matches the light and medium doors. In contrast, galvanized metal rack gear copes better with heavy doors and intense use. The metal version also supports mechanical shocks more easily.
For heavy gates, ROA81 has 30x30x1000 mm, M6 mode, and works with RUA12 crown. So, Nice accessories for sliding gates type rack gear are chosen after mode and weight. See all variants and category Gear racks.
How many racks you need
Each piece is 1000 mm. Therefore, the number of pieces follows the length of the race, plus a small reserve. For example, a gate with a 5-metre race requires 5 or 6 pieces in general. However, the installer shall set the exact figure on the spot. Then order Nice accessories for sliding gates in the correct number.
Nice parts for sliding gates: exchange units
When the electronics fail, the motor can still be good mechanic. In this case, Nice accessories for sliding gates type exchange unit spare you a new motor.
- RBA3: replacement unit for ROBUS series.
- RBA3/HS version: for RB250HS and RB500HS fast engines.
- NKA3: for the NKSL400 engine, with gates of not more than 400 kg.
- ROA38: ROX replacement unit.
- RUA6: for RUN400HS and RUN1200HS engines.
For example, unit NKA3 returns an NKSL400 with a defective plate. In other words, Nice accessories for well-identified sliding gates greatly shorten the intervention.
Before ordering, compare the code on the old plate to the one in the name of the play. Small differences, such as the HS suffix, change compatibility. For example, RBA3/HS only applies to RB250HS and RB500HS fast engines.
Nice parts for sliding gates from the RUN range
RUN engines have dedicated parts. RUA1 plant matches RUN 1800/1800P and RUN 2500/2500P. Then RUA2 and the RUA3 inverter serve the RUN 2500I version. Therefore, at heavy industrial gates, check the exact engine version before the control. Only then do you choose Nice accessories for sliding gates from the RUN range.
The two-key CM-B
The CM-B comes with two keys and addresses Nice ROAD400 automations. It helps to unlock the engine under control. Thus, the bolt is included among the Nice accessories for sliding gates useful for unlocking. Thus, only keyed persons can unlock the gates manually. Also keep the keys in a place known to the family or the security staff. On a power outage, they allow for quick manual opening.
How to choose Nice accessories for correct sliding collars
First, read the engine label and write the complete code. Then search in the description of the piece that code or that series. At the racks, measure the existing profile and check the module. With these data, orders Nice accessories for sliding gates without return.
- Engine code, for example RB600, NKSL400 or RUN1800.
- Weight and length of the gate.
- The type of the rack already mounted on the gate.
If the old engine no longer has repair, see category motors sliding gates. At the gates of industrial courts, the rules of labour security are found on the site Labour Inspectorate.
Nice accessories for sliding gates: signs of wear
Some defects can be seen easily, others can only be heard. Here are the signals that require Nice accessories for new sliding gates:
- Scratching noise or teeth that jump to start.
- Gates stop in different places at each cycle.
- The engine starts, but the gate doesn't move.
- The power plant no longer responds to remote control or button.
The first two signs often keep racking or adjusting gear. Instead, the last two may indicate an electronic problem. Therefore, Nice accessories for proper sliding gates start from a correct diagnosis. A installer shall first check the supply, safety and connections.
Correct mounting of the cremation
At ROA7 and ROA8, rack rack is caught on the gate with the screws and distances in the package. Between the teeth and the pinion remains a small game, so that the gates do not press the motor. Then, the joints between the pieces must keep the tooth pace. Thus, Nice accessories for carefully mounted sliding gates work without noise and without locks.
Maintenance of mechanical parts
Rack and pinion gear need regular checks. Clean the teeth of sand and leaves. Then check whether the distance between rack and pinion gear remains constant. In addition, tighten the weak screws after the first season. Thus, Nice accessories for sliding gates simply prolong your engine life.
Frequently Asked Questions about Nice pieces for sliding gates
Can I put nylon rack rack on a 700-pound gate?
It is not recommended, as ROA6 is intended to cover up to 500 kg. Choose a metal variant.
What exchange unit do I choose for RB500HS?
RBA3/HS, designed for RB250HS and RB500HS.
Can I combine ROA81 with any motor?
No, no. ROA81 has M6 mode and works with RUA12 crown, with motors with compatible pinion.
Where do I find Nice accessories for sliding gates RUN?
In the same category: RUA1, RUA2, RUA3 and RUA6, following the engine version.
Find all Nice accessories for sliding gates in category Sliding automation accessories. The Nice Store team helps you identify the right piece for your engine.















