Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Types of automatic industrial doors and suitable Nice engines

Industrial solutions

Types of automatic industrial doors and suitable Nice engines

Types of automatic industrial doors you meet in any hall, warehouse or workshop: sectional, two-leaved, foldable, balanced shutters or high-speed doors. Each requires another motor and another transmission. We show you how you recognize them and what Nice automations fit each other.

In short: sectional with Soon or Sumo, sliding with Sumo, foldable with Hippo, oblonane with Giro or Rondo, and high-speed doors with HDFN engines.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

There's no good industrial door for any coat. The sectional keeps the heat and releases the space from the void, and the sliding goes where the ceiling is down. Instead, the foldable fits into gaps with no rail space, and the balanced oblonium occupies a little space over it. Compare types of industrial doors automatically after the shed, then choose the engine from the category Industrial door automation, with the Nice Store team.

When you plan a hall, choosing between types of automatic industrial doors influences traffic, isolation and maintenance. In addition, Nice covers several families of doors, with motors dedicated to each. We continue to describe them, therefore, at a time, with the models in the category Industrial door automation. First of all, it's worth knowing that there's no good door for any coat.

Automatic sectional industrial doors

First, the sectional door goes up into the panels and squeezes under the ceiling. Therefore, it does not take place in front of the void and keeps the heat well. For this type, Nice proposes, for example, two families of motors with installation on the tree:

  • First, Nice SO2000, from the Soon range, for sectional doors up to 20 square meters and 5 meters high, with absolute encoder and Bluebus.
  • Then the Sumo range, with Nice SU2000 for 15–35 sq.m., plus the variants SU2000V and SU2000VV for smaller surfaces.

You also find them in Industrial door sectional automations. Thus, of all types of automatic industrial doors, the sectional often appears in heated warehouses.

Two-leaved doors

Instead, the sliding door moves sideways on a rail. Therefore, it fits where the ceiling does not allow the panels to be tightened. The Sumo engines also work here, that is, the US2000 and the US2010 operate two-leaved doors of 15–35 sq.m. at 24 V. They all have, in addition, magnetic encoder, so no more race-limiting rules.

Sumo models also appear in the category Sliding door automation. However, at the heavy back doors check first the condition of the rollers and the track. A new motor does not fix, however, a door that moves hard. In this case, among the types of automatic industrial doors, the sluggish requires attention especially to the mechanical part.

Doors with folding arms

The folding door has, in return, leaves that shrink. For her, in particular, Nice has the Hippo range, with Nice HY7124 24 V and HY7100 230 V. Both also come with telescopic arm and operate two-leaved removable doors. At the same time, HY7124 has magnetic encoder, as described. For example, HY7100 doors race limiter on opening and closing, according to the file.

Then you find them in folding door automations. The foldable also solves the gaps without rail space under the ceiling or on the side. So, in the old buildings, with narrow gaps, it's worth taking into account among the types of automatic industrial doors.

Balanced oblones

The oblation runs, that is, on an axis above the void. For balanced shutters, Nice has two families:

  • Giro with Nice GR170, 170 kg irreversible motor, i.e. 340 kg with additional motor.
  • Then Rondo, with Nice RN2040, irreversible, with brake and release, for 180 kg.

They both work at 230 V. The dedicated category is therefore called Oblonous automations. On the other hand, it is important to balance the bows in the oblations, because the motor only helps the lifting. In addition, Giro accepts an additional motor, which is GRA01 in the accessories category.

High-speed doors: automatic industrial doors for waste crossings

The quick doors open and close very quickly, as they must limit the air exchange between areas. Nice Store thus has a separate category for them, High-speed door automations, with HDFN engines at 3x400 V. Therefore, the complete list of types of automatic industrial doors also includes this family, suitable for very dense passageways.

However, the quick door does not always replace a sectional door. For example, many halls use a sectional for night closing and a quick door for daytime traffic. Thus, you combine good isolation with short passes. Therefore, large projects deserve to discuss both options with our team.

How to compare types of automatic industrial doors

Before choosing, first write down a few details about the hall:

  • The space above the void, especially for sectionals and oblations.
  • The free wall on the side, especially at the back doors.
  • Frequency of cycles, because a used door often requires motor for intense use.
  • The available feed, i.e. 24 V, 230 V or triphase.
  • In the end, the necessary parts, in category industrial door fittings.

In other words, there is no universal type. Choose the door after the hatch, and then the motor after the door. Once you have these data, therefore, you easily compare types of automatic industrial doors and avoid an oversized motor.

What data do you require from the manufacturer of the hall

First, it requires the exact dimensions of the void and the free height below the beams. Then find out the weight of the panels or the shutter because the engine force depends on it. In addition, ask what power supply there is next to the empty and where the electric painting reaches. At the same time, he asked how many cycles a day the beneficiary estimated because the frequency influenced the choice of the engine. Then, with these answers, our team proposes you automatic industrial door motors tailored to the project.

Safety at automatic industrial doors

Large doors move forcefully, and in the halls they circulate, especially, people and machines. Therefore, photocells, sensitive edges and manual unlocking are part of any project. For prevention principles, it also consults resources EU-OSHA. At the same time, the final solution for a hall is established after the project and after the risk assessment.

Frequently Asked Questions about Types of Automatic Industrial Doors

What motor do I put on a 30 square meters sectional door?

The Sumo range covers 15–35 sq.m., for example US2000 or US2010. However, check the height and weight of the door.

Can I automate an old shutter?

Yes, but only if the oblonium remains balanced. Thus, the Giro and Rondo engines are working just with balanced shutters.

What does magnetic encoder mean?

The engine measures its position itself, so no longer controls racing mechanical restraints.

Can I use a garage motor for automatic industrial doors?

Only if the surface and frequency fit, however, into the engine file. For halles, however, you usually choose industrial engines Sumo or Soon.

In conclusion, compare models in the category Industrial door automation. The Nice Store team thus helps you to choose the right solution for your hall from among the types of industrial doors.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).