Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Industrial door control panel: what to check at Nice NDCC units

Industrial solutions

Industrial door control panel: what to check at Nice NDCC units

An industrial door control panel coordinates the engine, safety devices and buttons of a door or roller sectional. Nice Store has Nice NDCC units in range, with several codes. The right choice starts with the engine you control and the hale network.

In short: you match the picture with the voltage of the engine, you bind the photocells and the edges, then you set exactly where and who controls the door.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A correctly chosen painting makes the industrial door predictable: it starts to control, stops at the heads and reacts immediately to the photocells or the sensitive edge. Matching the engine voltage avoids problems when starting up, and well thought out controls shorten the time for the stackers to pass. Compare Nice NDCC units in category control stations and choose the right option for your industrial door and its engine.

An industrial door control panel receives the controls, reads the sensors and starts the engine in the correct direction. Without it, the engine of a door sectional or a rolling shutter doesn't make sense. Category control stations find Nice units in the NDCC series. At the same time, you deserve to understand what each part of the installation does before ordering. Also, the painting usually stands by the door, at the operator's fingertips.

What makes an industrial door control panel

First, the table power the engine and change its direction of rotation. Then it gets pulses from buttons, keys, radio receivers or inductive loops. In addition, monitor the safety devices and stop the movement as needed. Thus, the door responds predictablely to each command.

  • Command: Open, stop, close, from buttons or from a distance.
  • Safety: photocells, safety edges, emergency stop, as appropriate.
  • Signalling: lamps or sirens, where the installation requires it.

In other words, an industrial door control panel decides how the door moves, not only if it moves.

NDCC series, Nice industrial door control unit

Range includes several codes: NDCC1000, NDCC1003, NDCC1100, NDCC1200, NDCC2000, NDCC2100 and NDCC2200. The differences between the codes read them in the technical file of each one. For example, the card tells you which motors accept the unit and what inputs it has. At the same time, close codes can have different functions. Therefore, choose not by number, but by the engine and functions you need. The store team helps you compare variants before ordering.

Therefore, an industrial door control panel in the NDCC series is chosen together with the engine, not separately.

Single or three-phased: engine voltage

Many Nice industrial motors work at 3x230/3x400 V, i.e. on the three-phase network. For example, Nice SD-100-24 for sectional doors and RDF series for rolling shutters have this power supply. Instead, SDNI-120-20 and SWN-70-20 work at 230 V. Therefore, an industrial door control panel designed for triphase does not fit a single-phase and reverse motor.

At the same time, check if the hall has a three-phase power supply at the assembly point. The details confirm the authorized electrician who makes the connection.

Sectional doors, rolling shutters and balanced shutters

Each type of industrial door has another way of moving and another rhythm of working. For example, the sectional door goes up the rails, and the rolling shutter is wrapped on an axis. In addition, balanced shutters use their own motors, such as the Rondo RN2010–RN2040 or Giro GR170 series, at 230 V. Thus, the logic of command differs from one type of door to another. At the same time, industrial sliding doors have their own motors, in their category.

Therefore, an industrial door control panel should be chosen according to the type of door, not just the voltage. Especially at fast doors, the large number of cycles requires a painting designed for intense use.

Safety related to an industrial door control panel

A large industrial door moves a considerable mass, sometimes at high speeds. The painting must therefore receive a signal from the photocells and safety edges. The borders you find in safety edge, and engines in Industrial door sectional automations. On the other hand, the emergency stop button must remain accessible. In crowded warehouses, people and stackers pass through the same void.

For any industrial door control panel, the rules of work safety matter as much as the technical part. Official information can be found on the website Labour Inspectorate. Finally, the concrete solution shall be determined by the designer or installer after risk assessment.

Where do you order the door

The local command usually stays the button on the painting or a button box. Further, you can add key selectors, radio receivers or remote controls. For example, a Nice receiver with coupling reduces the cables in the hall if the painting accepts it. The driver thus opens the door without coming down from the machine.

However, access to an industrial door control panel should be limited to trained personnel.

Assembly and commissioning

  • Mount the painting to a comfortable height, with direct view to the door and to the passing area.
  • Position the separate cables for power and control, in protective tubes.
  • Adjust the race heads before the safety tests.
  • Test the photocells and edges at each start.
  • Train the staff who use the door daily.

What you're preparing before you order an industrial door control board

  • The exact code and engine voltage on the label.
  • The type of door, sectional, rolling or sliding, and the dimensions of the void.
  • The list of safety devices you attach.
  • Number of control points, fixed points and radio.

With these data, the choice becomes fast and secure. In addition, the Nice Store team can check compatibility before ordering.

Frequently asked questions

Can I use any industrial door control board with my engine?

No, because the painting has to match the voltage and motor type. Check both technical sheets before mounting.

What does feeding 3x230/3x400 V mean?

It means that the engine accepts the three-phase network in the right connection, star or triangle. The electrician chooses the option after the network available in the hall.

Can I order the door through remote control?

Yeah, if the painting has a radio receiver input. However, some halls prefer only fixed commands, for control reasons. At the same time, keep a fixed button next to the door.

Who mounts an industrial door control panel?

We recommend an authorized electrician, who also knows work safety requirements for industrial spaces.

Units in the NDCC series find them in category control stations. If you don't know which industrial door control board fits your engine, the Nice Store team will help you choose. Only prepare the engine code, the type of door and the available voltage.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).