
Nice control plate: how to find the right exchange unit
A Nice control plate receives signals from remote controls, photocells and buttons and decides what the engine does. When it fails, the gate or door no longer responds, although the engine in the rails can remain functional. That's why it's worth knowing which exchange unit corresponds to each model.
In short: identify the engine code, find the dedicated exchange unit (MCA, SNA, RUA, WLA) and reconnect after the photos.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A suitable Nice control plate restores automation to life without changing the engine. Turn on the engine label, choose the dedicated exchange unit, then photograph the connections and redo the settings after the manual. For self-propelled motors, units such as TT1N offer a stand-alone rail solution. Finally, you test the photocells and stop at the obstacle. View all models in category control stations And ask for the help of the Nice Store team.
A Nice control plate represents "the brain of any automation, i.e. read the controls, control the engine and monitor safety. On Nice Store, for example, category control stations gather 34 products, from dedicated exchange units to standing rail units. In the front guide, see first how you find the right plate and then what you check before replacing.
What makes a Nice control plate
First, the plate receives the pulse from remote control or from the button and starts the engine in the correct direction. Then stop the race at the end, based on the limiters or the encoder. In addition, listen to sensitive photocells and edges and stop the movement at the obstacle. In some models, for example, the radio receiver is on the plate.
Therefore, a malfunctioning Nice control plate blocks the whole system, even if the engine and accessories remain good. Thus, many installers first check the plate when the gate no longer responds. However, a power outage or a burning safety give similar symptoms, so the diagnosis matters.
Nice exchange unit for each motor
In addition, most of the products in the category cater for the name of the exchange unit. In other words, Nice produces a dedicated plaque for each engine family. For example, here are a few pairs in the catalogue:
- Nice MCA2 for MC424L and MCA4 for MC824L.
- MCA5, i.e. the plate for MC800.
- SNA2 for SPIN20KCE, SPIN21KCE and SPIN22KCE and SNA20 for SPIN23KCE.
- WLA1 for WL1024C and also RBA4 for RDKCE.
So, a Nice control plate is chosen by the engine code, not by appearance. Two plates may look similar, but they have different internal connections and programs.
Control plate for RUN back doors
RUN engines operate, in particular, sliding heavy gates, in the category motors sliding gates. For the series RUN400HS and RUN1200HS, for example, the catalogue has Nice RUA6 control unit. These motors work at gates up to 400 kg and 1200 kg respectively, i.e. heavy gates. Instead, for RUN 1800/1800P and RUN 2500/2500P you use exchange centre Nice RUA1.
It also reads carefully the letters at the end of the code, as variants with P or HS differ. In this case, a plate for another variant may not properly control your engine.
At the same time, at heavy sliding gates, the plate works together with the limiters and the engine encoder. Therefore, after assembly of the re-learning race, so the plate knows the end positions. In addition, check the stopping force, especially if pedestrians circulate around the gates.
Nice standing rail control unit: TT1N and HKA2
In addition to dedicated plates, the category also includes independent control units. For example, Nice TT1N controls a 230 Vca motor up to 500 W. It has integrated radio receiver, two programming modes and, at the same time, programmable work time. Then it comes with the catch device, so you attach it easily to the motor. Thus, TT1N assists 230 Vca engines without own control, up to 500 W. In addition, the HKA2 unit complements the supply of control units in this category.
For industrial solutions, instead, Nice Store also has a separate category of Industrial units, with the NDCC series. Thus, choose a Nice control plate and for industrial rollers or doors, not just for gates.
What information do you prepare before ordering
First, write down the complete motor code on the label. Then photograph the old board, with its label and all visible connections. In addition, check whether automation uses Bluebus accessories, as some plates have dedicated terminals for them. With this information, therefore, our team quickly identifies a compatible Nice control plate. At the same time, avoid ordering one plate for another motor variant.
How to replace a Nice Step by Step control plate
The replacement requires attention, but it has no secrets. Following, therefore, the order below:
- First, stop the power supply from the painting and check the lack of tension.
- Photograph all connections, including the receiver and safety terminals.
- Note displayed settings such as pause time, force and speed.
- Then mount the new board and reconnect after the photos.
- In the end, he learns the race and the remote controls again, according to the manual.
Later, test the photocells and stop at the obstacle before handing out the gates. Thus, the new Nice control plate works safely from day one.
Signs that the plate is in trouble
However, not every pan comes from the plate. A few symptoms deserve attention, however:
- The engine does not react, although the power supply and remote control works, i.e. the signal does not get any further.
- Diagnostic LEDs signal, for example, repeated errors.
- Automation starts alone or, instead, stops in the middle of the race.
- The built-in receiver no longer teaches new remote controls.
In this case, a technician first checks the feed, fuse safety and accessories. It hardly decides whether a Nice new control plate solves the problem. On the other hand, the moisture in the power box often causes intermittent defects, so it also checks the sealing of the cap. For the general safety requirements of automations, in addition, the reference standards are found on the site ASRO.
Frequently asked questions: Nice control plate
Can I put a plate of another model on my engine?
We do not recommend it, because Nice exchange units correspond to specific motors. The file of each product thus indicates the compatible model.
The old remotes go with the new board?
You usually memorize them again, which means you're redoing the learning process. Code and receiver decide compatibility, so check manual and category radio receivers.
Has a Nice radio receiver control unit?
It depends, however, on the model. TT1N, for example, has an integrated receiver, as described.
How do I find the engine code?
First, look for the label on the housing or inside the cap. Send us a photo and we'll identify the plate.
In conclusion, find the right unit in the category control stations. The Nice Store team also helps you choose a Nice control plate compatible with your engine.
















