Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Industrial sectional door motor: Sumo or Soon from Nice

Industrial solutions

Industrial sectional door motor: Sumo or Soon from Nice

An industrial sectional door motor shortens each opening and keeps the pace in the hall. Nice offers two families for such doors: Sumo, for surfaces between 10 and 35 m2, and Soon SO2000, for doors up to 20 m2, with BlueBUS. See how you choose the model correctly.

In short: Sumo covers 10–35 m2 in four variants, and Soon SO2000 goes up to 20 m2 and 5 m high, with absolute encoder and BlueBUS.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

The choice of the motor starts from the door surface, continues at the desired speed and ends with the working environment. Sumo offers fast variants and an IP54 version, and Soon brings BlueBUS and absolute encoder. A well-chosen industrial sectional door motor works daily without frequent adjustments and keeps the flow in the hall. Check accessories, such as the CRA7 crown for Sumo. Compare models in category Industrial door sectional automations.

Sectional doors in halls and workshops open many times a day, and manual handling consumes time. An industrial sectional door motor mounted directly on the axle takes over this work and works constantly. Category Sectional door automations find two Nice families: Sumo and Soon.

Sum: four variants for large doors

The Sumo range doors 24 Vdc irreversible motors with magnetic encoder. Therefore, you no longer regulate race limiters as in classical systems. At the same time, the motor has a compact body, especially in width, and is mounted directly on the door shaft. Sumo works with sectional doors, but also with back doors with two leaves. Practically, any industrial sectional door motor Sumo starts from the same base.

  • Nice SU2000: doors between 15 and 35 m2.
  • Version SU2010: all 15–35 m2, with IP54 protection degree, as shown in the sheet.
  • Model SU2000V: 10–25 m2 doors, in quick version.
  • The U.S.2000VV version: doors of 10–15 m2, in a super-fast version.

Therefore, an industrial sectional door motor of the Sumo range is chosen according to the area and the desired speed. For example, a 4 x 4 m door has 16 m2. Thus, it falls within the range of the US2000 and the US2010, but also into the range of the US2000V.

Magnetic or absolute encoder: what it means to you

Sumo doors magnetic encoder, and SO2000 doors absolute encoder. Both read the door position and remove the mechanical adjustment of the limiters. Practically, when you start programming the positions in the plant. Thus, an industrial sectional door motor with encoder keeps the stops accurate over time. However, check after mounting the races and stopping at the obstacle.

Soon SO2000: BlueBUS sectional door motor

On the other hand, Nice SO2000, of the Soon range, covers sectional doors up to 20 m2. The file indicates doors up to 5 m high. In addition, the model doors absolute encoder and BlueBUS connection technology. In other words, you're legging compatible accessories simpler, with fewer wires.

At the same time, Soon applies directly to the door shaft. Therefore, an industrial sectional door motor of this type occupies little space next to the ceiling. For service, the SOA2 exchange unit exists separately in accessories.

Direct axle assembly

Both Sumo and Soon are mounted directly on the door shaft. Therefore, you don't need rail on the ceiling, like in residential garages. This matters in the halls with rolling bridges, ducts or illuminated up. Also, the compact body of Sumo leaves room on the side, where space is often lacking. Instead, check the axis diameter and the position of the arcs before the control. In other words, the measurements on the spot decide the assembly.

How to choose an industrial sectional door motor after use

The surface of the door shows the technical limit. However, daily use decides comfort. For example:

  • Moderate traffic workshop: SO2000 or SU2000, after the surface.
  • Intense traffic ramp and small door: U.S. 2000VV, for speed.
  • Hale with large door, of more than 25 m2: S2000 or S2010.
  • Zone exposed to dust or moisture: 2010 with IP54.

Thus, a suitable industrial sectional door motor starts from a small dataset: surface, height, cycles and environment. In addition, note the available voltage by the door. On the other hand, at the doors used in several exchanges, choose surface reserve. For example, for a 20 m2 door with high traffic, the US2000 leaves more reserve than a model used at the limit.

Accessories that complete the assembly

A good motor requires and accessories correct. For example, the crown Nice CRA7, with 18 teeth, address Sumo automations. In addition, you find CRA3 chain and CRA8 wall support in category industrial door fittings. Thus, you adapt the motor to the door configuration without improvisations. Especially when replacing an old motor, check whether the existing chain or crown still matches.

Also, think about the command. Buttons, photocells and signalling complete any industrial sectional door motor. Therefore, include them in the budget from the outset. If you need triphasic motors for storage doors, see and Industrial solutions for sectional doors.

Safety around a sectional door motor

A large sectional door weighs a lot and moves on a wide surface. First, it ensures that the obstacle is stopped and periodically checks its reaction. Then keep the area under the door clear. At the same time, instruct the staff about manual unlocking. For general rules on health and safety at work, consult EU-OSHA.

In addition, add a flashing light next to the door and mark the maneuver area on the floor. Then check the photocells monthly and clean the dust lenses.

However, the final safety configuration for an industrial sectional door motor shall be established after the site risk analysis. In other words, the installer and the security officer decide together the necessary devices.

Frequently Asked Questions: Industrial Sectional Door Motor

Sumo goes through the back door?

Yeah. The Sumo cards mention sectional doors or sliding with two leaves.

What does magnetic encoder mean in an industrial sectional door motor?

The encoder reads the position of the door. Thus, the engine stops correctly without mechanical adjustment of the race limiters.

How high can the door be for SO2000?

The sheet indicates up to 5 m high and up to 20 m2 surface. Therefore, it matches many halls with high doors.

When do I choose SU2000VV?

When the door has 10–15 m2 and you want high opening speed. For example, at a ramp with dense passes, speed shortens waiting.

In conclusion, an industrial sectional door motor is chosen after surface, speed and environment. View models Sumo and Soon in category Industrial door sectional automations, And the Nice Store team helps you choose for your door.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).