Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Sectional garage door motor: strength, guidance and safety

Automotive garage doors

Sectional garage door motor: strength, guidance and safety

A sectional garage door motor lifts the panels on the guideboard, under the ceiling, and completely releases the entrance without occupying space in front of the garage. The correct choice starts from the door surface, the motor force in the newtons and the ceiling height. Nice range covers sectional doors from about 9 to 17,5 m2.

In short: calculate the surface of the door, choose the engine force, check the length of the guide and add photocells to stop the obstacle.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A proper automated garage means fast entry, without getting out of the car on the rain or cold. A sectional garage door motor chosen after the surface and force works quietly, and the proper length guide avoids the forces at the end of the race. The included Wi-Fi models bring and order from your phone. Enter the sectional door automation category, compare Spinbus models and then complete with Nice kits and accessories.

A sectional garage door motor pulls the door on a guideboard trapped under the ceiling. The panels climb vertically, then slide horizontally over the car. Thus, the driveway in front of the garage remains free. Category Sectional door automations Find the Nice Spinbus models, 24 V.

Cum lucrează un motor ușă secțională de garaj

The engine is fixed to the ceiling in the center of the garage. From him leaves a guide to the buiandrug of the door. A top panel-bound carriage moves on the guide. Therefore, when the engine starts, the wagon pulls the door up or pushes it down.

In addition, Spinbus models have built-in control units. In other words, you don't need a separate power plant on the wall. Thus, a sectional garage door motor is mounted faster and with fewer cables.

Newton Force: Spinbus SN6031 and SN6041

Engine force shows how easy the door lifts. For example, Nice SN6031 develops 800 N. Instead, Nice SN6041 reaches 1000 N. Both models cover sectional doors up to 17.5 m2 and up-and-over doors up to 14.7 m2.

Then why would you choose the strongest model? First, the heavy doors demand force reserve. Then, a garage used several times a day wins from an motor that does not work at the limit. Thus, a sectional garage door motor with larger force offers a comfortable margin.

Motor separate garage door or complete kit?

A kit usually includes the engine, the guide and the remote controls. Therefore, for a standard door, the kit simplifies the choice. See selection from garage door automation kits.

  • Kit Nice SPY800BDKCE Sectional door cover of 12,5 m2 and tilting of 14 m2.
  • The SPY550KCE model stops at 9 m2 for sectional doors.
  • Spider series brings included Wi-Fi, for example Nice SPIDER1200WKLT, for sectional doors up to 16.9 m2.
  • The SPIDO600KLT version goes to the door sectional up to 9.6 m2.

However, a separate sectional garage door motor remains useful for replacements. For example, you choose it when you want a certain force, like 1000 N at SN6041.

Guide and ceiling height

At a sectional garage door, the length of the guide depends on the height of the door. High doors require longer guides. That's what it's for extension of Nice SNA31, 1 metre, for the SNA30 guide. SNA16 plates with quick coupling also help to fix to the ceiling. The SPA7 kit adds two plates for additional fastening. If the ceiling has beams or pipes, plan the route of the guide beside them. Sometimes an extra fixation reduces vibrations throughout the guide.

First measure the free space between the door and ceiling. Then check where the door gets in the open position. Therefore, a well-positioned garage door sectional motor does not touch the panels or lighting bodies.

Safety at automation garage door

The door goes down above the car, children and animals. That's why stopping the obstacle matters a lot. Many modern motors detect abnormal effort and reverse movement. However, a pair of photocells at the entrance adds an additional level of protection.

  • Mount the photocells to the height recommended by the manufacturer.
  • Test monthly stopping with a soft object under the door.
  • Check the manual, useful power outage.

In this case, a sectional garage door motor remains safe for daily use. For the standards applicable to electrically operated doors, general information can be found at: Standardisation Association of Romania.

Steps for choosing a sectional garage door

  1. Calculate the surface of the door: width multiplied by height.
  2. Check the door balance with her arches.
  3. Choose the engine force, with a reasonable reserve.
  4. Set the length of the guide and the attachments.
  5. You decide the type of command: remote control, button or phone.
  6. Add photocells and, optionally, a flashing light.

In other words, the motor doesn't repair an unbalanced door. Especially at the old doors, it requires a check of the arches before mounting. Thus, a sectional garage door motor works without overload.

Command from the phone

Some Spider kits with Wi-Fi included. Thus, you open the garage in the application, without remote control. For other models, Nice interfaces compatible with BusT4, such as IT4WIFI, bring a similar function. However, check the technical file to see if the chosen engine has BusT4. Spare parts, such as SNA2 center, you find in the category garage door accessories. Thus, you control a sectional garage door motor and when you are away from home, if the application allows.

Errors to avoid when mounting

  • Guide only caught in gips-carton, no solid support.
  • Lack of a plug next to the motor, solved with improvised extenders.
  • Unverified bows before the engine.
  • Photocells omitted to gain time.

Each of these apparent savings reduces the lifetime of the facility. Instead, a sectional garage door motor attached to a solid structure, with proper power supply, works without vibration. It also explains to all family members how manual unlocking works.

Frequently Asked Questions about Motor Door Garage

What is the difference between SN6031 and SN6041?

Main forcehold difference: 800 N at SN6031 and 1000 N at SN6041. Maximum areas declared remain the same.

Can I automate a tilting door with the same motor?

Yeah. Spinbus covers and up-and-over doors, up to 14.7 m2. However, check with the installer the attachments needed for your door.

What surface does a Nice garage door drive to the store?

Spinbus models rise to 17.5 m2. The SPIDER1200WKLT kit reaches 16.9 m2 for sectional doors.

Do I need permanent power in the garage?

Yeah, the engine's requesting a plug or a dedicated power supply by the ceiling. Therefore, you foresee the circuit before mounting.

Choose a separate garage door motor according to your category door Sectional door automations. The Nice Store team helps you choose from engine strength to guide and accessories.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).