Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Nice tilting door motor: what you choose between Spinbus SN6031 and SN6041

Automotive garage doors

Nice tilting door motor: what you choose between Spinbus SN6031 and SN6041

A Nice tilting door motor turns a tiresome maneuver into a button push. Spinbus range, with SN6031 and SN6041 models, doors belt traction, 24 Vdc motor and built-in control unit. See what the surface covers and how you choose between them.

In short: Spinbus covers up-and-over doors up to 14,7 m2; SN6031 has 800 N, SN6041 has 1000 N, and the guide comes from the SNA30 or SNA31 series.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

The right choice starts from the surface of the door, from the weight and the guide. Spinbus SN6031 fits the usual doors, and SN6041 brings strength reserve for heavier doors. If you start from scratch, a complete kit simplifies the assembly. In any case, a suitable Nice tilting door motor brings you daily comfort and smooth maneuvers. Do not forget the photocells and a balance check before mounting. Compare models in category tilting door automations.

A heavy tilting door, opened daily by the hand, quickly becomes uncomfortable. A Nice tilting door motor solves the problem and allows you to enter the garage without getting out of the car. Category tilting door automations find two Spinbus motors, SN6031 and SN6041. In addition, the neighboring categories offer you complete kits.

What the Spinbus range offers

Both Spinbus models use traction with 24 Vdc belt and motor with magnetic encoder. At the same time, the power supply comes from the 230 Vac network, and the control unit is incorporated into the motor. Therefore, you do not mount a separate power plant on the wall. Practically, each Nice tilting door motor in this series starts from the same technical base.

The main difference holds the force. Nice SN6031 develops 800 N, and Nice SN6041 reaches 1000 N. So, with a Nice tilting door motor, the greater force gives you the reserve for heavy doors or with a more rigid mechanism.

What surface covers a Nice tilting door motor

The records indicate two limits. For sectional doors, Spinbus climbs to 17.5 m2. Instead, for tilting doors, the limit drops to 14.7 m2. The difference arises because the movement of an up-and-over doors requires otherwise the mechanism.

For example, a 2.5 x 2.1 m tilting door has about 5.25 m2. Thus, it falls slightly within the limit of 14.7 m2. However, weight and balance matter as much as the surface. In other words, a Nice tilting door motor works well only on a door that moves easily and remains balanced.

Guide: SNA30 or SNA31

The Spinbus motor works with a guide. The file recommends the SNA30 or SNA31 guide. Therefore, when you control a separate Nice tilting door motor, check the appropriate guide for the door height. In addition, spare parts such as the unit Nice SNA2, You find them in garage door accessories.

At the same time, the ceiling mount requires a solid fixing point. Especially in garages with beams or false ceiling, check from the time you catch the guide. Thus, avoid vibrations and noise during the race.

Separate tilting door motor or complete kit?

On the other hand, you may need a ready-made package. Category garage door automation kits Find variants with all components. For example:

  • Kit Nice SPY550KCE, for up-and-over doors up to 10.5 sq.m. and 9 sq.m. sectionals at 24 V.
  • Package Nice SNA7BD, for tilters up to 11.8 sq.m. and 10.5 sq.m. sectional.
  • SPIDER variants with Wi-Fi connection, for anyone who wants control from the phone.

So, you choose the motor separately when you already have guidance and accessories. Instead, the complete kit simplifies a zero installation. At the same time, a kit usually includes remote controls and basic accessories. However, check the exact list on the card, because the packages differ. In both cases, a Nice tilting door motor must exceed the actual surface of the door.

Safety and comfort in the garage

An automated garage brings comfort, but requires attention. First, check if the door stops at an obstacle. Then, keep the remotes away from the kids. Also add photocells at the entrance, especially if bicycles or animals are circulating in the courtyard. For benchmarks on standards in the field, you can consult ASRO.

At the same time, think about the blackout. The door must remain manually accessible, so check the installation release system. Thus, a Nice tilting door motor doesn't leave you locked in the garage. In addition, keep the area outside the door free during the manoeuvre. Especially at the swinging doors, the cane comes out at the opening, so it doesn't seem too close.

Noise and comfort with a tilting door motor

The belt drive has a clear advantage in the garages glued to the house. Usually the belt works more silently than the chain. Therefore, if above the garage you have a bedroom, Spinbus becomes a logical choice. At the same time, the magnetic encoder reads the position of the door, and the engine stops precisely at the head. In addition, the 24 Vdc engine allows for start-up and stop-line, which handles the door mechanism.

Brief assembly

  • Check the door balance and the anointing of the swings.
  • Fix the SNA30 or SNA31 guide on the ceiling and on the buiandrug.
  • Grab the door arm.
  • Connect the 230 Vac feed and schedule the races.
  • Test stopping the obstacle before use.

Ideally, leave the assembly of an experienced installer. Thus, a Nice tilting door motor starts right from the first use.

Check list for the tilting door motor

  • Calculate the surface of the door and compare it to 14.7 m2.
  • Make sure the door moves easily and remains balanced.
  • Choose between 800 N and 1000 N by weight.
  • Confirm SNA30 or SNA31 guidance.
  • Count the necessary remote controls for the family.

With this list, a Nice tilting door motor arrives in the garage without surprises. You can also keep the list for the installer.

Frequently Asked Questions About Nice Rolling Door Motor

Can I use Spinbus and the sectional door?

Yeah. Sheets SN6031 and SN6041 indicate sectional doors up to 17,5 m2. The same motor therefore serves both types of doors.

When do I choose SN6041 instead of SN6031?

Choose SN6041 when the door is heavy or rigid. It has 1000 N, compared to 800 N at SN6031, so you keep a force reserve.

Do I need a separate power plant for the Nice tilting door?

No, at Spinbus. The control unit is incorporated into the motor, according to the file.

What swinging door covers a smaller kit?

For example, SPY550KCE covers up-and-over doors up to 10.5 square meters. So, it fits the usual size garages.

In conclusion, a Nice tilting door motor is chosen after the surface, force and guide. View Spinbus models in category tilting door automations, And the Nice Store team helps you choose if you have any doubts about your door.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).