Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Pipe motor for rollers: how to choose the couple and order

Solutions for shade

Pipe motor for rollers: how to choose the couple and order

A roller tube motor is hidden in the axis on which the blades are wrapped and lifts the roller effortlessly, on the button or by radio. The correct choice is based on the weight of the roller, the diameter of the axle, the available voltage and the way you want to control the installation, local or centralized.

In short: estimate the weight of the roll, choose the right couple and feed, then add a radio control unit and adjust the race heads.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A correct motorized roller climbs and descends evenly, without sudden stops and without the forced blades. When you choose a tubular motor for rollers after weight and after the axis diameter, the installation works quietly, and the Nice radio command brings you daily comfort. For showcases, halls or commercial spaces, the RDF triphasic series covers large tasks. Enter the Automated Rollers category and compare the models available before ordering.

A roller tube motor turns a manual roll into a button-operated, radio-controlled or automatic-scenes roll. The motor fully enters the axis of the roller, so it can't be seen from the outside. Category Roller automations You can find Nice motors from the RDF series, for rolling shutters with 3x230/3x400 V power supply.

How a roller tube motor works

The engine body is tube shaped and enters the winding axis. At one end, an adapter catches the ax engine. On the other end, a support secures it in the roll box. Thus, when the engine rotates, the axle wraps or unfolds the blades. In addition, race limiters stop the roller up and down in the mounting positions.

Therefore, a roller motor of this type does not require space outside the box. For this reason, a tubular motor for rollers appears often at homes, apartments and commercial spaces.

What data do you need before ordering

First, you estimate the weight of the roll. It depends on width, height and material of the blades. Then measure the inside diameter of the axis. Finally, set the available voltage at the assembly site.

  • The weight of the roll: it depends on the required couple, in newton-meters.
  • Axle diameter: the engine and adapters must fit exactly into the tube.
  • Speed desired: a higher speed climbs the roller faster, but usually with a lower torque to the same gauge.
  • Power supply: single phased in dwellings or three phased in large installations.

In other words, a tubular roller motor too weak forces, and a oversized one costs useless. Therefore, it is worth comparing the technical sheets before the choice.

Automating rollers for home, window or cloakroom

The context changes requirements a lot. In a home, the roll usually has moderate dimensions and works a few times a day. Instead, a commercial window opens in the morning and closes at night, but has a large width. In a locker room, the roll can cover even an empty access for the merchandise.

  • For bedrooms, it is especially important to operate silently and order locally.
  • The windows demand large couple and often command with key or code.
  • Hales frequently use triphasic feeding and centralized command.

For this reason, a housing roller tube motor is not directly compared with a three-phase RDF motor. First you define the context, then you choose the range. At the same time, set from the beginning where you mount the buttons and the radio receiver.

RDF series: motor for large rollers and oblones

The Nice RDF series in the store is for large load rolling shutters. All models use 3x230/3x400 V three-phase power supply. For example, you find Nice RDF-140-20, Nice RDF-500-24 or Nice RDF-1400-24. The range continues to models such as RDF-1100-10 and RDF-1250-24.

However, the code alone does not reach for a correct choice. Check the accepted torque, speed and axis diameter in each model file. So, the engine for a window differs a lot from the engine for a bedroom window.

Tubular motor for rollers or motor for balanced shutters?

Not every shutter uses an motor in the ax. Balanced oblons, with bows, usually work with central motors, caught on the bow axis. Category Oblonous automations You find, for example, the Rondo and Giro series. The Rondo RN2030 model is up to 130 kg and Giro GR340E01 is up to 340 kg. Therefore, the shutter's type decides the motor family, not just the weight.

Command: radio, wall or scenarios

An motor without proper control remains only half useful. For one single roller tube motor, unit Nice TT2N bring in the integrated radio receiver. Thus, connect the engine and control it directly from remote control. For more rolls, NiceWay modules offer individual or group commands.

  • Module Nice WM004G control four automatisms and activate the sun sensor.
  • The Opla series wall supports turn the transmitter into a fixed, discreet button.
  • Mini heels, such as WCO or WCI, make the transmitter easy to carry in your pocket.

Also, the command accessories find them in the category control and programming. Thus, a tubular roller motor becomes part of a complete shadowing system.

Assembly of a roller motor, in short

  1. Remove the roll from operation and release the axis.
  2. Mount the right adaptor and crown on the motor.
  3. Enter the engine into the axle and fix it to the support.
  4. You make electrical connections according to the manufacturer's schedule.
  5. Set the race heads up and down.
  6. Test the climb and descent a few times.

However, the connection of a tubular roller motor to the network requires an authorized electrician. Especially at the three-phase power supply, a wrong connection changes the direction of rotation. For industry standards, general information can be found at: Standardisation Association of Romania.

Frequent errors in a roller tube motor

  • Choice after price, without calculating the weight of the roll.
  • An adaptor unsuitable for the axis profile.
  • Too tightly adjusted race heads that press the blades.
  • A local command button was missing by the window.

Instead, a choice made on real data keeps the roll in better condition for longer. In other words, a correctly chosen roller tube motor works quietly and without shocks.

Frequently Asked Questions about Tubular Motor for Rollers

Can I mount a tube motor on an existing roller?

Yes, most of the time. However, check the axis diameter and the space in the box before the control.

What does 3x230/3x400 V power mean?

It means three-phase food, frequent in halls and commercial spaces. The 230 V monophase power supply is normally used in houses.

Can I order more rolls at once?

Yeah. Each roller tube motor receives group control via the NiceWay multi-group modules, such as WM004G or WM080G.

How do I choose the engine couple?

You start from the weight of the roll and from the axis diameter. Then compare the values to the technical data sheet and keep a moderate reserve.

If you want a tube motor for rollers chosen on real data, compare models in category Roller automations and check each other's files. The Nice Store team helps you choose from the motor to the radio.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).