Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Nice intermittent lamp: role, power supply and correct mounting

Automation accessories

Nice intermittent lamp: role, power supply and correct mounting

An intermittent Nice lamp announces through the light that gates, door garage or barrier is starting to move. It seems like a detail, but it helps pedestrians and drivers react in time. The right model depends on the voltage of the automation, the wiring and the place where you mount it.

In short: ELAC for 90–240 Vca, ELDC for 12–36 Vcc, WLT for ordinary installations and LLW wireless, with integrated photovoltaic panel.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

An intermittent Nice lamp requires a little effort to mount, but it changes the way people perceive an automatic gate. Choose the model after the voltage of the power plant or after the possibility to pull the cable. Then you sit it at a height, visible from both directions, and combine it with the photocells. Regularly clean the scatter, so the light remains visible and the day. See all four models in category signalling lamps and choose the right option for your installation.

An intermittent Nice lamp visually signals every movement of automation. The light pulses before and during the opening, so the people around you immediately notice the danger. However, the Nice range does not have a single universal model. Category signalling lamps You find four variants, with different feeds. Below you see how you distinguish them and how you choose.

Why does a flashing lamp matter Nice

A sliding gate or a baton sometimes starts without the pedestrian hearing the engine. That's why the light becomes the first warning signal. Especially at night, a flashing Nice lamp can be seen from a distance. In addition, the drivers waiting at the door understand that the system has received command.

  • It warns pedestrians, children and cyclists nearby.
  • Visually confirms that the remote transmitted the signal.
  • Mark the position of the gate or barrier in the dark.
  • Complete the photocells, which stop the movement at the obstacle.

Nice light flashing model

The four models have the same purpose, but differ by feeding and installing.

ELAC and ELDC: same family, two voltages

Nice ELAC lamp works at 90–240 Vca. The manufacturer shall also indicate it for areas at risk of overvoltage. Instead, Nice ELDC It works at 12–36 Vcc. Both use LED technology and a shock-resistant body, designed for fixing in several positions. Thus, an intermittent Nice lamp of the Era Light family also adapts to the wall, and to the pillar.

WLT: compact LED solution

Nice lamp WLT doors all intermittent LED light. The product file indicates IP44 protection degree and operation between -20°C and +50°C. Therefore, they do well in the usual Romanian climate, at gates and garage doors.

LLW: Wireless lamp with photovoltaic panel

Model LLW communicate wirelessly and have integrated photovoltaic panel. In other words, don't pull cable to the lamp. This Nice intermittent lamp helps a lot when the pole doesn't have a cable tube or when you don't want to break the pavement.

How to choose an intermittent lamp Nice after power supply

First, check the output voltage of the control unit. Then choose the lamp that matches that output. As an example:

  • Networking power station, at 230 V: ELAC, with beach 90–240 Vca.
  • Low voltage automation at 24 V: ELDC, with beach 12–36 Vcc.
  • Installation where the cable is missing: LLW, with photovoltaic power.

So, an intermittent Nice lamp chosen wrong may not start or may deteriorate. If you don't know the voltage of the output, read the power plant manual or ask the installer.

Where you mount an intermittent Nice lamp

The position counts as much as the model. The lamp must be seen from both directions of access. Normally, the installers put it up on the gate pole or the wall next to the entrance. On the other hand, avoid hidden places of vegetation or the mailbox.

  • Height: above the eye level, so as not to cover a car.
  • Orientation: to the street and to the yard, not just in one side.
  • Fixation: on a stable surface, without strong vibrations.

In the end, a well-placed Nice intermittent lamp also warns neighbors passing the sidewalk.

Flashing light Nice and photocells

The lamp warns, but it doesn't stop the movement. To stop you need to Safety photocells and possibly safety edges. For example, Nice EPL photocell set fits many Nice automations. At the gates of the courts of firms and warehouses, the principles of risk prevention are found at European Agency for Safety and Health at Work.

Therefore, an intermittent Nice lamp works best in a complete system. Together with the photocells, it reduces the risk of hit and surprise.

Pre-alarm: light before movement

Many Nice power stations allow a pre-alarm. In other words, the lamp blinks a few seconds before the engine starts. Check the power plant manual for the function and how you activate it. Thus, an intermittent Nice lamp warns before the gates move.

Nice intermittent lamp at gates, garages and barriers

Each automation uses a slightly different Nice flashing lamp. At the sliding gates, light warns especially passers-by on the sidewalk. In the case of the battle gates, she announces that a leaf sweeps the yard. On the other hand, at the garage doors, the lamp helps the driver waiting in the street.

  • Sliding collars: lamp on the pole from which the collars start.
  • For batting: visible position in the courtyard and street.
  • Door garage: above or next to the frame.
  • Barriers: some Nice series also have LED in their lid, such as XBA7.

So, an intermittent Nice lamp adapts to every automation, if you choose its right place. In addition, when entering multiple automations, mount one lamp for each, so that the signal remains clear.

Simple maintenance

LEDs have a long lifespan, however the lamp requires some checks. A dirty flashing light Nice is hard to see in daylight. Regularly clean the dust and insect disperser. Then check the sealing after the heavy winters. In the LLW model, it keeps the photovoltaic panel clean and bare.

Frequently Asked Questions about flashing light Nice

Can I use an intermittent Nice lamp at the garage door?

Yeah. The WLT file mentions the use both in gates and in the door garage. Just check the power supply.

What is the difference between ELAC and ELDC?

The difference holds power. ELAC works at 90–240 Vca, and ELDC works at 12–36 Vcc.

Does the LLW lamp need cable?

Not for food. This light Nice flashing uses the integrated photovoltaic panel. However, check the radio compatibility with your power station.

Does the lamp replace the pictures?

Nope. The lamp only warns, while the photocells detect obstacles and stop the movement.

Choose the right Nice intermittent lamp from the category signalling lamps. The Nice Store team helps you check compatibility with your central and automation.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).