Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
Nice kit for battant collars: external mounting, underground or with arm

Swing gate automation

Nice kit for battant collars: external mounting, underground or with arm

A Nice kit for swing gate brings together the engines, the central and the accessories in a compatible package. Range includes external mounting (WINGO, TOONA), articulated arm (Hyppo, HYKE) and underground variants (S-FAB, M-FAB). See how you choose from the pillars, the length of the cane and tension.

In short: choose the assembly after the pillars and appearance, then the kit after the length of the cane, from 2x1.8 m to 2x5 m, and the voltage, 24 V or 230 V.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

Choosing a kit starts from the pillars and from the desired appearance: external motor, articulated arm or underground mounting. Then compare the length and weight of the cane with the limits of the name. In the end, you decide between 24 V, for linear manoeuvres, and 230 V, for classical construction. A Nice kit for well-chosen batty collars, complete with photocells and lamp, works safely day by day. Compare variants in category Swing automation kits.

A two-leaf gate requires a well-developed system: two motors, central, remote controls and safety accessories. That's why many customers prefer a Nice kit for battant claws, with pieces designed to work together. Category Swing automation kits You find variants with external mounting, with articulated or underground arm.

Three assembly modes, three kit families

The first criterion is how the engine gets caught by the gates. Each type has clear advantages:

  • External mounting, with engine on the leaf: WINGO3524KCE, TOO3024KCE or TOONA series.
  • Articulated arm, good for large pillars: Nice Hippo 7005 or Nice HYKEBDKCE.
  • Subterranean, almost invisible: M-FAB 3024 HS, Nice SFAB2024BDKCE or SFAB2124BDKCE.

So, choose a Nice kit for swing gate first after the poles and after the desired look. Then check the length and weight of the cane.

How to measure correctly your throat

  • The length of each leaf, from hinge to end.
  • Estimated weight after material and filling.
  • The width of the pillars, which decides the type of mounting.
  • The direction of opening, inside or outside.
  • The free space in the yard on the cane run.

With these data, you can easily compare each Nice kit for swing gate. For example, at narrow poles you stay at WALKY or at an underground kit. Instead, at thick pillars, the articulated arm solves the assembly. At the same time, take into account the filling of the gates. A full gate opposes great resistance to the wind, so it needs force reserve. Thus, the choice becomes swift and correct.

Length of the cane: Nice kit for size-fitting knifes

The name of each kit shows the maximum dimensions. For example, WALKY2024BDKCE covers 2x1.8 m, and Nice TOONA 5605 It goes up to 2x5 m. Between them you find intermediate steps:

  • 1.8 m leaves: Nice WALKY2024BDKCE, compact, suitable for poles of only 8 cm.
  • Up to 2.3 m: S-FAB underground kits.
  • 3 m leaves: TOO3024KCE, TOONA 4605, TOONA4024BDKCE, Hippo 7005 or M-FAB 3024 HS.
  • Between 3.5 and 4 m: WINGO3524KCE, HYKEBDKCE or L-FAB 4000.
  • Cates husband, 5 m: TOONA 5605.

However, weight matters as much. Name and mass, e.g 2x100 kg WALKY or 2x400 Hippo kg 7005. In addition, cards sometimes give different limits for combinations of length and weight. Therefore, a Nice kit for battant claws should cover and length, and the table of the cane.

24 V or 230 V: what Nice kit for your choice

Kits are also shared after engine voltage. WINGO3524KCE, TOONA4024BDKCE, HYKEBDKCE, S-FAB and M-FAB 3024 HS work at 24 V. Instead, TOONA 4605, TOONA 5605, Hippo 7005 and L-FAB 4000 use 230 V.

The 24 V engines allow, as a rule, start and stop line. At the same time, HYKEBDKCE and TOONA4024BDKCE have magnetic encoder, according to the cards. On the other hand, TOONA on 230 V has a classic construction, with bronze snail and aluminium casing. So, a Nice kit for 24 V battant gates matches traffic often. Instead, the 230 V option remains a solid option for heavy gates.

Underground assembly: maximum discretion

If you want a gate without visible motors, look at S-FAB and M-FAB. The S-FAB sheet describes a foundation box with a height of only 81 mm and a prominence of 52 mm to the ground. In addition, the steel receives cataphoresis paint with a thickness of 2,5 mm. On the other hand, M-FAB 3024 HS is part of the Hi-Speed range, for quick openings. Plus, the little tape leaves the alley almost clear.

However, the underground assembly requires foundation works and careful drainage. Therefore, a Nice kit for underground barter gate is planned prior to the turn of the alley.

Jointed arm for large pillars

Hippo 7005 and HYKEBDKCE use joint arm. Thus, the motor is mounted on the pillar, even on large pillars, where a linear motor does not fit. The Hyppo card mentions an anti-forging, galvanized and dyed arm, with race limiter to opening and closing. At the same time, HYKEBDKCE aims to use intensively.

For parts and accessories, see Swing automation accessories, where, for example, you can find PLA6 and PLA8 supports. If you just need the motor, check and swing gates motors. In this case, a Nice kit for battling is still the simplest option for a new installation.

Safety of a Nice kit for batting claws

A bartender gate rotates towards the yard or street, so the moving area requires attention. First, mount the photocells on the outside and inside. Then add a visible flashing light. Also check the push force and stop at the obstacle. Especially at the gates that open to the street, check not to keep passers-by in the cane race. For benchmarks on applicable standards, consult ASRO.

So even the most complete Nice kit for batting gates needs careful installation and periodic checks.

Frequently Asked Questions about Nice Kit for Battant Gates

Which kit do I choose for a pedestrian gate?

WALKY2024BDKCE, for small leaves and narrow poles, about 8 cm. The file recommends it especially for wooden or PVC doors.

Can I automate a five-meter gate with leaves?

Yeah. TOONA 5605 covers 2x5 m, as called.

When is a Nice kit worth for underground batty collars?

When you want a clean look and you have space for the foundation tapes.

Does the kit include remote controls?

The content differs from one kit to another. Therefore, check the list in the individual product file.

In conclusion, a Nice kit for battant claws is chosen after mounting, length of the cane, weight and tension. See all variants in category Nice Swing Automation Kits, And the Nice Store team helps you choose for your ass.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).