
Nice photocells for the gate: relay, BlueBUS or battery?
Photocells stop throats when a man, a child or a car passes through her right. The correct choice of Nice photocells for central gate, assembly type and protection area. See, briefly and practically, the differences between BF, EPL, EPSA, F210 and FT210B.
In short: choose relay or BlueBUS after the power station, then mount on the wall, recessed, slim, adjustable to 210° or with battery on the mobile booth.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
The safety of an automatic gate depends a lot on the photocell. Check first if the plant accepts BlueBUS, then choose the assembly according to the pillars and walls. For mobile sales, battery sets complete sensitive edges. Mount at least one pair on the outside and one pair on the inside, after the installer has been recommended. Thus, Nice photocells for the right gates reduce the risks at each maneuver. Compare sets in category Safety photocells.
The photocells stop or reverse the movement of the gate when something goes through their right. This is why the Nice Gates are not an optional accessory, but a basic piece of safety. Category Safety photocells Find fixed, adjustable, slim, recessed or battery-powered models.
How a pair of photocells works
One photocell emits one beam, the other receives it. When the beam is interrupted, the power station receives signal and stops the manoeuvre. The EPMOR file describes this principle: detection of obstacles on the optical axis between transmitter (TX) and receiver (RX). In addition, the same file mentions the type D device according to EN12453. In other words, the photocell sees only one line, not a whole surface.
Therefore, when you mount Nice photocells for gates, it matters the height and alignment. It also counts on connection to the power station: classic relay or BlueBUS.
Releu or BlueBUS: Nice photocells for compatible gates
Here comes the first technical choice. Exhaust models, such as Nice F210, connects to the classic power plant entrances. Instead, the variants with ‘B' in the code, as well as Nice EPLB or F210B, using BlueBUS technology. Thus, connect the accessories more easily if the plant accepts BlueBUS.
So, check the gate center first. If you support BlueBUS, Nice gate photocells with "B Â simplifies wiring. If not, choose the option with the relay. Especially at new installations, BlueBUS reduces the number of wires drawn through the tube.
Fixed, swivel or slim: which photocells Nice choose
- Fixed on the wall: Nice BF, immune to sunlight, mounted on the wall without holes or channels.
- Large indoor and outdoor models: EPL, radius up to 15 m.
- Stacked in the pillar: Nice EPLIO and EPLIOB, adjustable to 30°.
- Horizontally oriented: F210 and F210B, 210° horizontal and 30° vertical.
- Slim, with anti-effraction metal casing: Nice EPSA and EPSAB, within a radius of 15 m.
For example, at a narrow pillar, the slim version occupies little space. Instead, in thick pillars or walls, the embedded models show discreetly. In other words, Nice gate photocells are also chosen after the architecture of the entrance. Moreover, the 210° adjustable version helps you when the pillars don't stand perfectly face to face.
Mounting height and alignment
The photocells protect only the area through which the beam passes. Therefore, mounting height matters a lot. Usually, installers choose a height that detects both a car and a person. In addition, adjustable pairs, such as EPLIO at 30° or F210 at 210°, compensate for non-aligned pillars. At the same time, mounting on the wall without holes at the BF simplifies the work on finished walls.
Nice photocells with battery on the mobile cane
Sometimes you need protection even on the moving cane. For this there are FT210 and FT210B, with wireless transmitters for fixing on mobile doors. However, the card states that the FTA1 or FTA2 battery kit remains mandatory. Therefore, include it in command from the beginning. For example, at a long leaf gate, the transmitter on the leaf moves with the gates.
At the same time, these models work with sensitive edges. Find suitable edges in category safety edge. Thus, Nice gate and edge photocells cover together and the area next to the leaf.
Reflection: only one unit with mirror
EPMOR works differently. Uses reflection technology and a reflective mirror, plus blueBus self-synchronization. So you're wired to one part of the passage. In this case, the reflective version helps where on the opposite side you have no food. Moreover, the file mentions anti-efractory versions, with reflection and wireless in the same range.
On the other hand, the distance and the mounting conditions matter. Check the sheet before choosing Nice photocells for reflexive gates.
How many pairs you ride and where
Only one pair rarely covers everything. Usually, the first pair is outside, right at the gate. Then, the second pair protects the interior, on the cane race. In addition, a category lamp signalling lamps Warn when the gates start. For benchmarks on standards in the field, consult ASRO.
However, the final configuration depends on the type of portion and the risk analysis. So, he's discussing the location with the installer, that Nice Gates photocells cover critical areas. Especially at the gates, the booths pass through areas that only one pair does not see.
Maintenance for Nice photocells
Dust, spider webs or snow can block the beam. So, periodically clean the lenses with a soft cloth. Then, test stopping the gate by passing an object through the photocells. If the gate does not react, stop using and call the installer. Also check after the storms if the supports have remained fixed. Thus, the Nice Gate photocells retain their safety role over time.
Frequently Asked Questions about Nice Gate Photocells
Can I mount BlueBUS cameras on any power plant?
Nope. The plant must accept BlueBUS. Otherwise, choose models with relay output, such as F210. You can also ask for help identifying the model of the plant.
What radius does the EPL and EPSA models cover?
The records show up to 15 meters. However, the useful range depends on assembly and alignment. Therefore, at very wide gates, measure the distance between the pillars before the control.
What are Nice photocells doing for strong sunlight?
The BF file describes them immune to sunlight. EPSA also distinguishes foreign bodies from strong solar rays.
Why does FT210B require a battery kit?
The transmitter is sitting on the mobile, wireless. Therefore, the FTA1 or FTA2 kit is feeding it.
In conclusion, the Nice gate photocells are chosen after the central, mounting and protective area. View all sets in category Nice safety photocells, And the Nice Store team helps you choose for your ass.
















