Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
How to automate garage door: correct steps, from measuring to kit

Automotive garage doors

How to automate garage door: correct steps, from measuring to kit

If you wonder how you automate garage door, the answer starts from the door type and from its surface. Nice has rail motors for door and tilt sectionals, complete kits and mounting accessories. Below you find steps, in the order in which you walk them to a real installation.

In short: identify the type of door, measure the surface, choose the kit after the force and length of the rail, then add the photocells and check the unlock.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A successful automation starts with a balanced door and with correct measurements. Then choose a SPY, SPIDO or SPIDER kit after the surface or a Spinbus motor for large doors. If the door is high, complete the track with the SNA30 guide or with the SNA31 extension. Finally add the photocells and check the manual release. See all solutions in category garage door automations, Nice Store team shows you how to automate garage door without mistakes.

Many owners want to know how you automate garage door without changing the existing door. The good news is, however, that most sectional and tilting doors accept a railed ceiling motor. However, the right choice depends on a few simple measurements. We take them, therefore, at a time, with models in the category garage door automations.

Step 1: How you automate garage door by its type

First, look at the way the door opens. For example, the sectional door goes up the rails, into articulated panels, and gets under the ceiling. Instead, the tilting door rotates from a piece and comes out a little outside at the opening. At the same time, a classic doorway requires another type of automation, so it does not enter this guide. On the Nice Store, the above two types have, as a result, separate categories:

Therefore, the first answer to the question how you automate garage door keeps the door mechanics, not the motor.

Step 2: Measure surface and check balance

Then calculate the surface, that is, the width multiplied by the height. The manufacturer shall also indicate for each motor the maximum surface area, separately for the door and tilter sectionals. For example, Nice kit SPY550KCE goes to the 9 sq m sectional doors and 10.5 sq m tilters. For bigger doors, instead, Nice SPIDER1200WKLT climbs up to 16.9 sq.m. in the sectionals and 19.5 sq.m. in the tilters.

Then check the balance. In other words, a balanced door easily rises with its hand and stays in place halfway through the race. If the door falls or goes up alone, call a bow technician first, then mount the motor. So, before you decide how to automate garage door, you make sure the door goes smooth and without motor.

Step 3: a kit or motor for garage door

Category kits garage door automation kits contain, first of all, everything you need for the start. For example, Nice SPIDO600KLT has motor with control unit and integrated receiver, two remote controls and 3.2 meter rail. The SPIDER800WKLT version adds additional Wi-Fi connection and brushless motor, for sectional doors up to 11.4 mp.

When you compare kits, you look at three things, that is the accepted surface, strength and equipment. The Wi-Fi engine allows you, for example, to control the Yubii app, according to the product file. Instead, a simple kit with remote controls covers the needs of many garages. In other words, choosing the kit shows how you automate garage door according to your habits.

When you choose a separate motor

For heavy or large doors, instead, the Spinbus range offers built-in drive motors. For example, Nice SN6031 develops 800 N and SN6041 reaches 1000 N. Both work at 24 V and also accept 17.5 square meters and 14.7 square meters. Thus, you also have a solution for garages with doors beyond the usual dimensions. In this case, a separate chosen door garage motor gives you more strength than a basic kit.

Step 4: Check the ceiling and track length

First, the track must cover the entire door race. Many kits come with rail 3.2 meters, but the high doors demand more. In this case, you find in garage door accessories preset guide Nice SNA30, 3 meters, and extension SNA31, 1 meter. Also measure the free space between the open door and ceiling because the engine needs space.

The question how you automate garage door in a garage with ceiling down therefore has a technical answer, not just commercial. Then note the free height and send it to the team before the command.

On the other hand, in garages with beams or installations on the ceiling, check the track path before digging. Also, choose the motor position so that the unlocking remains handy. In addition, you foresee a take-off near the motor, as it needs power from the network.

Step 5: Add Safety Elements

The automatic door moves by itself, so it has to stop at the obstacle. The engine's power station usually follows the effort during the race, but the photocells add an extra level of protection. You also find them in the category Safety photocells. At the same time, it keeps manual unlocking handy for powerless situations.

For the technical requirements of electrically operated doors, you can consult the standards on the site ASRO, the national standardisation body. So safety is part of the complete answer to the question how to automate garage door correctly.

Frequent errors in garage door automation

  • The engine chosen only after the price, without the comparison of the accepted surface.
  • Unbalanced door, thus tireing the engine from the beginning.
  • The track too short for door height, especially at high garages.
  • Lack of photocells, especially in garages with children or animals.

Therefore, the answer to the question how you automate garage door holds more preparation than the assembly itself. A short plan, on paper, you get rid of most of these problems.

Frequently asked questions about garage door automation

Can I automate an old tilting door?

Yes, but only if the door moves easily and remains balanced. Then check the surface and choose an motor that accepts it.

What do I get in a Nice kit?

The SPIDO and SPIDER kits in the catalogue include, for example, motor with control unit, receiver, two remote controls and 3.2 meter rail.

Do I need Wi-Fi?

Not necessarily. Wi-Fi helps if you want to order from the phone, but the remotes cover daily use.

Who mounts an motor for the door garage?

It may also be fitted by a installer with experience in automation. For heavy doors or tight arches, we recommend a technician.

Now you know how to automate the garage door step by step. Therefore, see all solutions in the category garage door automations, And the Nice Store team helps you choose the right kit.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).