Technical advice: 021 450 60 70 · Delivery nationwide · Blog

Nice Store
Offers
021 450 60 70 Contact

Installation and service for automation details

Product categories
OffersSee discounts ›
How to automate a gate: guide on Nice models

Swing gate automation

How to automate a gate: guide on Nice models

If you're wondering how you automate a swing gate, the answer depends on the length of the cups, the weight, the pillars and the desired appearance of the entry. Nice range covers mounting with articulated arm, linear or buried motor, at 24 V or 230 V, for leavens from 1.8 to 5 meters.

In short: measure the cane, estimate the weight, choose the external or buried assembly, then the tension, attachments and safety elements.

Do you need help choosing?

Tell us what you need and we'll send you the offer on the same working day.

A properly automated batting gate starts and stops lin, without shocks in the hinges. A motor chosen after the length and weight of the cane works more quietly, and Nice fixtures and race limitation fixtures keep the settings stable. Now you know how to automate a swing gate without guessing the pattern. Compare the kits, engines and accessories in the Automatization swing gates category and choose the right option for your entry.

You think how you automate a swing gate without choosing the engine at random? The answer starts from the gate, not the catalog. First measure the cane, then estimate the weight and check the pillars. All the models in this guide you find in the category swing gate automations, from Walky to Toona and M-FAB.

What you check before choosing the engine

Any project starts with three simple measurements. First, you write down the length of each leaf. Then you estimate his weight. In the end, measure the space between the hinge and the corner of the pole. This data shows you how to automate a swing gate: with an articulated arm, with a linear motor or with a buried motor. It also matters how many times it opens its throats one day.

  • Length of the cane: manufacturer indicates clear limits, e.g. 1.8 m at Walky or 5 m at Toona 5.
  • Weight: the same motor takes more on a short leaf and less on a long one.
  • Stables: at wide poles, the articulated arm works more comfortably than a linear motor.
  • Power supply: choose between 24 V and 230 V, after use and preferences.

With these values, you already have half the answer. The rest is for the type of assembly and accessories.

How to automate a swing gate with external motor

The external assembly remains the simplest for an ordinary yard. The motor stands between the pillar and the leaf, and subsequent interventions are easy. In the Nice range there are two main variants. The first uses an articulated arm, the second a linear motor.

Joint arm: Walky, Hyke and Hippo

The articulated arm provides a good answer to how you automate a barren gate with wide poles. For example, the Nice WALKY2024BDKCE kit is intended for doors with two leaves of up to 1.8 metres at 24 V. For longer leaves, the HYKEBDKCE kit climbs up to 3.5 meters and uses magnetic encoder. At the same time, the engine Nice HY7005 work at 230 V, for gates of 3 m and 400 kg or 2 m and 800 kg.

Linear motor: Wingo and Toona

The linear motor pushes the cane through an axis, between the pole and the gates. Thus, the kit Nice WINGO3524KCE Covers leaves up to 3.5 metres at 24 V. For heavier gates, the Toona series offers aluminium housing and variants of 24 V or 230 V. For example, TOONA4024BDKCE kit has magnetic encoder and leaves up to 3 meters. So, if you accept a visible mounting, here you find the fastest response to how you automate a swing gate.

Buried version: M-FAB, S-FAB and L-FAB

Some owners don't want any motors on sight. In this case, the buried solution hides the mechanism under the leaf. The engine is in a foundation box, and the entrance keeps its appearance clean. However, the work requires digging, drainage and a stable share of the pavement.

  • Kit Nice SFAB2024BDKCE use a foundation box of only 81 mm height, for leaf up to 2.3 meters.
  • The M-FAB series runs at leavens up to 3 metres, in a 24 V or 230 V range.
  • The L-FAB 4000 model climbs to 4 meters on the leaf, with mechanical limiter at closing.

So, when you wonder how you automate a swing gate with a buried motor, it starts from the field. The boxes choose them separately, such as MFABBOX for M-FAB or LFABBOX4 for L-FAB.

24 V or 230 V for automation batting gate

Engine voltage changes the behavior of the portion in daily use. The 24 V engines have, as a rule, smoother start and stop. In addition, many 24V power plants accept a backup battery. On the other hand, 230 V engines remain a classic choice for heavy leaf. For example, Hyppo 7005 and Toona 4605 work at 230 V. Instead, Toona 4024 and Wingo 3524 use 24 V.

In other words, there's no better voltage at all. It matters the traffic, the weight and how often the current stops in your area. Thus, you decide more easily how to automate a barbaric gate without compromises.

Accessories that complete the automation of the floating portions

A good motor doesn't work alone. You need supports, stoppers and sometimes parts for large opening angles. Category Swing automation accessories find some useful examples.

  • PLA6, PLA8, PLA14 and PLA15 support fix the engine to the pole and the lever.
  • Nice PLA13 Mechanical Limiters Set the stop points at opening or closing.
  • The BMA1 accessory allows openings up to 360 degrees, for leaf up to 3.5 meters.
  • BMA2 adapters help to install two motors buried in commercial boxes.

Also, when you plan how you automate a swing gate, think about safety from the beginning. Photocells, flashing light and sensitive edge are easily added if you foresee them at wiring. At the same time, remote control with dynamic code makes copying of the signal more difficult.

Practical Steps: How to Automate a Right Battling Gate

  1. Measure the pictures and estimate each person's weight.
  2. Choose the type of mounting: articulated arm, linear or buried.
  3. Check the desired voltage and control station location.
  4. Prepare the cable track before finishing.
  5. Mount the engines, then adjust the stoppers and race.
  6. Add the photocells, the lamp and the remote controls.
  7. Test the force and stop at the obstacle, then hand over the installation.

However, even if you know how to automate a strong gate, the electrical assembly remains the job of an experienced installer. The right rules protect people, animals and cars around the gate. For general principles of safe working, consult and resources European Agency for Safety and Health at Work.

Complete kit or separate motor gate?

A kit usually contains the engines, the power station and a few control elements. Therefore, the choice becomes faster for a standard gate. See selection from Swing automation kits, where you find dozens of Nice variants. In contrast, the engines of the swing gates motors fit with replacements or special configurations. For example, TTN6024RHS covers gates of 6 m and 225 kg or 4.5 m and 450 kg.

So the kit simplifies the decision, and the separate engine provides flexibility. Both roads answer the same question: how do you automate a swing gate according to your home.

Frequently Asked Questions about Automating Swing

Can I automate a gate with very wide pillars?

Yes, in many cases. The articulated arm, as in Hyke or Hyppo, compensates for the great distance between the hinge and the corner of the pillar.

What maximum length does the Nice range cover from the store?

The TOONA 5605 kit goes to leavens up to 5 meters. The TTN6024RHS engine climbs to 6 metres, but with less weight on the leaf.

How do you automate a baton gate that opens outwards?

In this case, the geometry of the mounting changes. Therefore, discuss quotas with the installer before ordering, as some motors require special supports.

Do I need a separate foundation box?

Yeah, to the buried engines. For example, M-FAB uses tapes like MFABBOX, and L-FAB uses LFABBOX4.

Now you know how you automate a step-by-step swing gate, from measurements to accessories. Enter the category swing gate automations and compare Nice models after length, weight and tension. If you need support, the Nice Store team will help you choose.

Recent articles

All articles

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

They make the site work: shopping cart, favourites, customer account sign-in, form security and remembering your cookie choice. They cannot be disabled.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).