
How to choose an automatic barrier Nice: WIDE, S-Bar or M-Bar
If you run a parking lot, a company yard or residential access, it's worth knowing how to choose an automatic barrier before comparing codes. The width of the access road, the intensity of the traffic and the mounting environment decide which body, which arm and which Nice accessories fit your place.
In short: measure width, estimate traffic, choose the steel or stainless steel housing, then complete with arm, anchor base and safety.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
A well-chosen barrier works years in a row without surprises, because each piece matches the requirements of the place. Start from the actual width of the access, choose the range after traffic and don't forget the safety: photocells, detectors and signalling. The final solution is to establish it together with the designer and a installer, especially on roads with public access. Compare models in the category automatic barriers, and the Nice Store team helps you choose the right configuration.
Many buyers ask for the price first, but the correct question is how to choose an automatic barrier suitable for the place. The answer starts from three data: the width of access, the number of passes and the environment in which the barrier works. Category range Automatic barriers Covers arms from 3 to 7 meters. So, there's a variant for almost any entry.
Step 1: The width of the access decides the length of the arm
The length of the arm follows the actual width of the access path. Nice bodies have clear areas of work. For example, M3BAR works with bars three meters long. Then M5BAR covers 4–5 metres and M7BAR climbs to 5–7 metres. In the WIDE range, WIDES goes with bars of 3–4 meters, and WIDEL reaches 5–7 meters. For example, for a 4 meter access, look at M5BAR, S4BAR or WIDEM.
Therefore, when you think about how to choose an automatic barrier, first measure the distance between pillars or edges. Then add a margin for the assembly of the body and end holder.
Step 2: Nice automatic barrier after traffic
Not all barriers work under the same conditions. Nice descriptions associate the WIDE M and WIDE L games with intense traffic. For example, WIDEM kit with 4 meters arm appears as a new model for such conditions. Instead, WIDEL often appears in small, residential or commercial parking lots. At the same time, the S-Bar range uses the steel housing and focuses on reliability.
In other words, the question how you choose an automatic barrier has a different answer for a block yard and a supermarket parking lot. For a few passes a day, an M-Bar kit usually covers needs. On the other hand, the frequency of manoeuvres also influences wear. Therefore, to intensive traffic you choose a range with reserve.
Step 3: Nice automatic steel or stainless steel barrier
Each Nice family has versions in two materials. Standard variants have painted steel casing, and M-Bar and S-bar add cataphoresis treatment. On the other hand, the codes finished in "I've got stainless steel casings. For example, WIDELI represents the stainless steel version of the WIDEL body. Similarly, M7BARI, S4BARI, WIDESI and WIDEMI follow the same rule.
Stainless makes sense by the sea, in areas with salt on the way or where aesthetics matters. So, you understand how you choose an automatic barrier and after environment, not just after size.
Separate body or complete kit
Nice Store offers both Barrier bodies, and complete kits. The kit includes the indicated length arm and remote control. Therefore, choose the kit when you start from scratch. Instead, the separate body helps to replace or project with individually chosen accessories.
Arms and pieces: how to choose a complete automatic barrier
Category Barrier accessories You find arms and grips. For example, XBA5 arm has 69x92x5150 mm and XBA14 has 69x92x4150 mm. The XBA19 bar, 45x58x4270 mm, has a thinner profile. At the same time, base SIA1 and the XBA16 base for M-Bar secures the body to the foundation.
Visibility and protection
A long arm must look good, especially at night. So, the WA10 reflective red bands and the XBA7 intermittent LED for the cap increase visibility. In addition, the XBA13 package offers rubber protection and the WA13 aluminum fence is 2 meters long. Also, a visible arm reduces the risk that a rushed driver will not notice it.
Foundation and site preparation
When you set how to choose an automatic barrier, you prepare and mount the place. First, you set the body's position against the circulation band. Then turn the foundation of concrete and leave the pipes for cables. Later, fix in concrete the anchor base with clamps, such as SIA1 or XBA16. Thus, the body remains stable, and the cables remain protected. In addition, the metal-mass detector loops are cut into asphalt before finishing. Therefore, the preparatory work matters as much as the product.
Automatic parking barriers: safety
When you analyze how you choose an automatic barrier, safety weighs as much as the arm. A barrier descends over a space through which people and cars pass. That's why we recommend photocells in any configuration, and mass metal detectors help manage the passageways. For example, the detector LP22 has two channels and works at 24 V. Find also LP21 model, with a channel, in category Metal mass detectors.
For current feathers, PS124 and PS224 batteries allow the barrier to function temporarily. Thus, the machines do not remain locked at entry during a penile. In addition, the LED in the lid warns drivers before moving. At the same time, the WIA20 exchange unit serves the barriers in the WIDE M, S and L series.
On roads with public access, the decision about choosing an automatic barrier is not yours alone. The final solution shall be established after the project, risk analysis and the requirements of the local authorities. The legal framework on movement finds that National legislative portal.
Frequently asked questions: how to choose an automatic barrier
What arm length do I need?
Measure the real width of access and choose the body that covers that value. For example, for 6 meters you look at WIDEL or M7BAR.
When does the stainless steel casing deserve it?
It is worth it in wet areas, near the sea or where salt is used in winter. In addition, stainless steel better retains appearance over time.
How do you choose an automatic barrier for intense traffic?
Start from the WIDE M or WIDE L games, which Nice associates with intense traffic. Then you check the foundation and the safety.
Can I set the barrier on my own?
We recommend an experienced installer, especially for foundation and wiring. Thus, the adjustments and safety work correctly from the beginning. The installer shall also check the force and speed adjustment.
Compare models in category Automatic barriers and in its subcategories. The Nice Store team shows you how to choose an automatic barrier suitable for your access.
















