
Safety edge for gates: profiles, rollers and wireless Nice
A safety edge for the claws stops or reverses the movement when the cane hits an obstacle. It completes the photocells, which see only on the line of the race, and protects the dangerous muchia of the canatile. Nice offers CMA mechanical profiles, roller edges and wireless transmitters for mobile booths.
In short: choose the length of the profile after the mug of the cane, rule the edge by cable or wireless, then periodically test the stop at the obstacle.
Do you need help choosing?
Tell us what you need and we'll send you the offer on the same working day.
The safety of an automatic gate does not stop at the photocells. A safety edge for the claws adds direct protection to the moving mutt and reacts to contact. The Nice CMA profiles, the roller edges and the TCW1 or TCW2 transmitters cover both the bell gates and the sliding gates. The final solution is to establish it together with the installer after the site risk assessment. Enter the category safety edges and choose the appropriate option for your portion.
A safety edge for the collars turns the mug of the cane into a sensor. On contact, the profile is compressed and sent a signal to the power station. Thus, the gate stops or reverses its movement. Nice models you find in the category safety edge.
Why do you need a safety edge for your collars
The photocells protect the line between the two devices. However, they do not cover the entire path of the cane. For example, at a sliding gate, the area between the leaf and the pole remains a crushing point. At the gates, the closing hole raises a similar problem.
Therefore, a safety edge for collars completes the photocells, does not replace them. Together, the two systems cover and distance, and direct contact.
Safety edge mechanical Nice CMA: lengths and profile
The CMA series uses aluminium profiles with 36 x 75 mm sections. Available lengths cover many residential leaves.
- The short version, CMA 1.5MT, is 1.5 metres long.
- The CMA 1.7MT model adds 20 centimeters and reaches 1.7 meters.
- Nice CMA 2MT profile measures 2 meters.
- The longest, Nice CMA 2.5MT, it's about a mile away.
The manufacturer indicates them for fixing on swing gates or sliding. So, choose a safety edge for the collars after the length of the protected muchia, not after the total width of the gate.
Lower mechanical wing: CMBK4 and CMBK6
Some gates need protection on the bottom end. For this, Nice offers the CMBK4 and CMBK6 kits. They are used for the construction of the lower mechanical wings, on aluminium profiles of 4 and 6 meters. According to the file, the kits are used together with CB. Therefore, check the complete list of components before ordering.
Fixed profile or role: how you decide
First, when you choose a safety edge for your mouth, look at the length of your mouth. If it approaches 1.5, 1.7, 2 or 2.5 metres, the CMA profile remains the simplest version. Instead, at atypical lengths, the 10 meter roll exempts you from compromises. It also matters the shape of the cane. For example, a leaf with rare vertical bars requires a solid attachment along the length. Therefore, a safety edge for correctly chosen collars starts with a careful measurement.
Safety edge in roll: TCB65 and TCBS60
When the length does not match a standard profile, the roller edge provides flexibility. For example, Nice TCB65 It's coming in for 10 meters. At the same time, TCBS60 represents a passive sensitive edge, still in the 10 meters roll. Thus, I cut the length required for each leaf. However, heads and connections require careful assembly, as instructed by the manufacturer.
In other words, a safety edge for roller-delivered collars solves the gates with unusual dimensions.
Connection with power station: cable or wireless
On a swing gate, the cable reaches relatively easy at the leaf. Instead, at a sliding gate the cane moves over a long distance. This is where wireless transmitters intervene.
- Nice TCW1 It works with batteries and fits in indoors or in sunless areas.
- Nice TCW2 use photovoltaic panel and rechargeable batteries, for outdoors or sunny areas.
- Interface Nice IRW connect the wireless edges of power plants with classic stop and photo inputs.
So, a safety edge for sliding necks usually works with a wireless transmitter. Interfaces of this type also find in category various interfaces.
Specialities in swing gates and sliding
At the gates, the canadians rotate around the swings. Thus, the risk arises on the closure hole and in the area between the leaf and the pillar. Instead, at the sliding gates, the cane slides parallel to the fence. That's why the crushing areas appear at the end of the race and along the fence. At the same time, a safety edge for swing collars receives easier power through the cable, as the cane remains close to the pole. On the other hand, the wireless version avoids spiral cables or portable chains.
Where you mount a safety edge
The assembly site depends on the type of the gate and the risk areas. The installer shall identify them when they are put into operation. However, a few positions appear frequently.
- The front end of the sliding gate, which closes to the pole.
- The opposite pillar, where the cane reaches the closing position.
- Lower part of the cane, at the small-space gates to the ground.
- The area between leaf and fence, at the opening of the sliding gate.
Therefore, a single safety edge for gate does not always cover all risks. The final solution shall be established after the risk analysis and the applicable requirements. General principles of accident prevention are found in European Agency for Safety and Health at Work.
Maintenance and testing
A border only works if it reacts at the right time. That's why they're testing monthly stopping with a soft object. Then check the rubber profile for cracks or deformations. In addition, in wireless variants, watch for battery status.
At the same time, clean the mud and ice heap in the winter. Thus, a safety edge for the collars keeps its sensitivity correct all year round. If you notice that the gates no longer react to the touch, stop the automation and call the installer.
Frequently Asked Questions about Safety Edge for Gates
Can I mount the edge on an already automated gate?
Yeah, usually. However, the power plant must have a suitable input or interface, such as IRW.
What length do I choose for a safety edge?
Measure the protected mutilla and choose the nearest profile: 1.5, 1.7, 2 or 2.5 meters. For atypical lengths, the 10 metre roll offers flexibility.
What transmitter do they use outside in the sun?
Version TCW2, with photovoltaic panel and rechargeable batteries. Instead, TCW1 with batteries goes into shaded areas.
A safety edge for the gate replaces the photocells?
No, no. The two systems complete and work together on the same gates. The photocells detect the obstacle from a distance, and the edge reacts to contact.
For a safety edge for your right collars, compare profiles, rollers and transmitters in the category safety edge. See and Safety photocells for full protection. The Nice Store team helps you choose.
















